Illustrated Catalogue of Cotton Machinery Part 13

[Ill.u.s.tration]

NOTE--The above table is based on ordinary twist, 1.20 x square root of hank, with an allowance of 15 minutes per set for doffing and stops.

{117}

JACK FRAMES.

PRODUCTION PER DAY OF TEN HOURS.

[Ill.u.s.tration]

NOTE--The above table is based on ordinary twist, 1.20 x square root of hank, with an allowance of 15 minutes per set for doffing and stops.

{118}

FLOOR PLANS OF SPEEDERS.

SLUBBING FRAME R.H.

INTER, FRAME R.H.

ROVING FRAME R.H.

[Ill.u.s.tration]

NOTE--The HAND of a speeder is determined by the end on which the driving pulley is located when facing the spindles.

{119}

LENGTHS OVER ALL OF SLUBBING FRAMES.

[Ill.u.s.tration]

NOTE--If the projection of fender bracket be taken into account, add 2 inches to the above lengths.

{120}

LENGTHS OVER ALL OF INTERMEDIATE FRAMES.

[Ill.u.s.tration]

NOTE--If the projection of fender bracket be taken into account add 2 inches to the above lengths.

{121}

LENGTHS OVER ALL OF ROVING FRAMES.

[Ill.u.s.tration]

NOTE--If the projection of fender bracket be taken into account, add 2 inches to the above lengths.

If double boss rolls, the number of spindles must divide by four.

{122}

LENGTHS OVER ALL OF JACK FRAMES.

[Ill.u.s.tration]

NOTE--If the projection of fender bracket be taken into account, add 2 inches to the above lengths.

If double boss rolls, the number of spindles must divide by four.

{123}

[Ill.u.s.tration]

FRONT ELEVATION OF HEAD END GEARING--ROVING FRAME

{124}

[Ill.u.s.tration]

ELEVATION AND SECTION OF HEAD END GEARING--ROVING FRAME

{125}

ROVING FRAMES.

ALPHABETICAL REFERENCES TO DRAWINGS

[Ill.u.s.tration]

{126}

ROVING FRAMES-CONTINUED.

ALPHABETICAL REFERENCES TO DRAWINGS.

[Ill.u.s.tration]

{127}

SLUBBING, INTERMEDIATE, ROVING AND JACK FRAMES.

DRAFT CALCULATIONS.

[Ill.u.s.tration]

{128}

[Ill.u.s.tration]