Every Boy's Book: A Complete Encyclopaedia of Sports and Amusements Part 46

[Ill.u.s.tration]

The _Hatteener_ has only two sails, a fore and a main sail, of a triangular shape. Each has a spar standing from the deck to the peak of the sail, and a boom at the bottom, like a cutter. This rig, from setting more canva.s.s abaft, is well adapted for narrow waters.

[Ill.u.s.tration]

[Ill.u.s.tration]

One of the most handy rigs for a young sailor is a triangular mainsail and foresail rig, on a good-sized open boat. She should be at least twenty feet long, and five feet on her beam. The foresail is carried over the stem for about a foot, by means of an iron bowsprit, which ships and unships on the nose of the boat. Her mainsail has a spar reaching from the lower part of the mast to the upper corner of the sail; a rope is fastened in the middle of this spar, and pa.s.ses through a block on the mast, by which the sail is hoisted. The advantages of this rig are, that it can be easily managed, while under it the boat is much safer than under most other kinds of rig; for, should a squall arise, the yachtsman has only to let fly his foresheet and put his helm alee, and the boat will right immediately. With this rig, a boat stands very well to windward, and may be easily brought about.

DESCRIPTION OF THE CUTTER YACHT.

But the vessel with which we have most to do in our directions for sailing is the Cutter Yacht, which stands closer to the wind than any other kind of European boat; and of which we propose, in the first instance, to give a general description.

CONSTRUCTION OF THE HULL.

The first step in the construction of the hull is laying down the keel or backbone of the vessel; which is done by fixing a strong piece of wood, generally oak, upon blocks, that the rest of the timber may be securely added; the stem is then joined to the fore-post, nearly at right angles, slanting a little forward as it ascends; and the stern-post to its after or hinder part, sloping upwards and backwards.

The timbers and ribs are next cut out of solid wood, and placed transversely on the keel, their width varying according to the lines of a plan previously drawn out,--being, of course, farthest apart at the beam; these, as well as the planks of larger craft, are made to bend into the required shape by being steamed and bolted in while hot. The skeleton being completed, her planks are then secured by copper or iron nails to the timbers, and riveted. The deck is made of narrow planks, running fore and aft. From the level of the deck, her sides are raised by upright timbers, called "stancheons," cased over by the bulwarks, and surmounted by a rail called the "gunwale." Some yachts are only half-decked, the after-part being left open and fitted with seats; but, in order to prevent the water from getting in, a portion of deck, called water-ways, is left at each side; which opposes a further barrier by its terminating on the inner edge in a high crest or combing. The stepping the mast requires great care, since the good or bad sailing of the boat depends very greatly upon it. If we divide the length of a good yacht into three parts, the point at which the foremost part joins the middle part will be the widest part, and there will be nearly the place for the cutter's mast. But the American builders have departed from this rule in the construction of their celebrated yacht, "The America," whose model, after all the study and ingenuity that have been applied to yacht-building, seems to resemble the simple yet beautiful model which nature has given us in the duck. The bow of this vessel rises very gradually for some distance along the keel, like the breast of the duck; and, further imitating the same model, her beam or widest part is abaft, or further back than the centre. This superior vessel will sail nearly four points off the wind, and will probably work an entire change in the present style of yacht-building. We have now glanced at all the princ.i.p.al parts of the hull, except that all-important part, the rudder; which swings by a hinge from the stern-post, and is moved by a handle fixed to its upper part, bearing the name of "a tiller," and which is used to steer the boat. Before proceeding with our instructions for sailing a yacht, it will be necessary to describe the action of the rudder; as the art of steering is the nicest and most important branch of seamanship.

[Ill.u.s.tration]

[Ill.u.s.tration]

The rudder is a flat board, with a pole rising up on the side, which is fastened to the vessel; on the top of which is fixed the tiller. In large vessels, there are two ropes fastened to the tiller, which are carried through blocks on each side of the vessel; then brought back through blocks fastened on the mizenmast, and pa.s.sed round a wheel, by which means a greater command is obtained over the rudder. When the tiller is moved to the right (starboard), the rudder, of course, is forced in the water to the left (port). As the vessel moves on, the water presses against the rudder on the port side, and thus forces her stern to the starboard side, and her bow to the port. When the tiller is moved to the left, it of course produces a contrary effect. If the ship is moving backwards, then, by moving the tiller to the right, the bow is also turned to the right; for the water presses against the rudder behind it on the left side, and thus pushes the stern to the left. In steering, care must be taken not to steer too much,--that is, not to move the rudder too violently or more than is necessary,--as this materially stops her way.

[Ill.u.s.tration: CUTTER AT ANCHOR.]

We here present the young yachtsman with a cutter at anchor, with her ropes and spars numbered; and which ought to be thoroughly known, as well as the uses to which they are applied in sailing a yacht:--

1. Stem.

2. Stern.

3. Tiller.

4. Anchor.

5. Cable.

6. Bowsprit.

7. Bobstay.

8. Mast.

9. Topmast.

10. Truck.

11. Vane and Spindle.

12. Cross-trees.

13. Trussle-trees.

14. Gaff.

15. Boom.

16. Topmast-shroud.

17. Topmast-backstay.

18. Topmast-stay.

19. Runner and Tackle.

20. Traveller for Jib.

21. Forestay.

22. Topping Lift.

23. Lift Blocks.

24. Mainsheet.

25. Peak Halliards.

28. Foresheet.

29. Signal Halliards.

30. Companion.

31. Forecastle.

32. Rudder.

SOMETHING ABOUT THE MASTS, SPARS, ROPES, ETC.

The _Mast_ (8) is a spar set nearly upright, inclining a little aft, to support yards and sails. In a yacht, it is kept in its place by two shrouds on each side, made of strong rope, and fastened to the sides of the vessel.

The _Bowsprit_ (6) is a spar carried out from the forepart of a yacht, secured at its inner end between two strong posts piercing the deck, called "the bitts." It is kept in its place by the bobstay (7), which is fastened to the stem, and by a shroud on each side secured to the bow.

The _Boom_ (15) is that spar which sets out the mainsail below, and is attached at one end to the mast by a swivel cable, called the "goose-neck," and is eased off or hauled in at the other by the mainsheet (24), which is a rope pa.s.sing from the end of the boom through a block on the side of the vessel.

The _Gaff_ (14) sets out the mainsail above, and slides up and down the mast by means of a crescent end, which embraces it. The sides of this curve are called "horns."

The _Topmast_ (9) stands above the mast, and is made to slide up and down. On it a topsail (_i. e._ a gaff-topsail) is set in light winds; but both sail and mast are generally lowered in squally weather. It is kept steady by a backstay (17) on each side of the foretopmast-stay. The latter is brought down to the bowsprit.

[Ill.u.s.tration: CUTTER BEFORE THE WIND.]

_Ropes._--There are various ropes to hoist and lower sails, called haulyards (p.r.o.nounced halliards). There are also other ropes of great importance, especially those called the sheets, which are to haul in the sails, and make them stand to the wind. In a yacht, the mainsail has sometimes a sheet each side; and sometimes only one sheet reeved through double blocks, which travel on an iron rod, called "a horse," from side to side. The jib has two sheets, the starboard and port (right and left). The foresail has the same, except in some instances, when it has but one sheet working on a traveller, like the mainsail. The topsail has only one, which is rove through a sheave at the end of the gaff and a block at the throat of the gaff, and then down to a cleat or fastening place on the deck. Signal haulyards are for hauling up the colours, and pa.s.s through a small sheave, in the truck (10), at the end of the topmast. The ensign haulyards are reeved through a small block at the peak end, and lead down to the boom. The other ropes on board a yacht are for the support of the spars, and are called "standing rigging,"

while those used for the sails are called "running rigging."

[Ill.u.s.tration: TOPMAST AND FORETOPMAST STAY.]

SAILING A YACHT.

If the reader has paid attention to our instructions, he ought now to be pretty well conversant with build, rigging, spars, and sails of a yacht; the next thing, therefore, is to explain the actual practical sailing of a yacht. The number of hands must depend on the tonnage of the boat and the number of sails. It is best to have a steersman, and one hand for each sail. Our yacht is now lying at anchor, or moorings, which consists of a chain and buoy, fastened to a heavy anchor sunk in the bed of the river. Having got on board, by means of the little boat called a "dingy," we first unloose the fore and mainsail, and forestaysail; haul out the jib on the bowsprit, ready for hoisting; hoist the colours, with the name of the yacht or club to which she belongs, to the gaff-end; and stand by to hoist the canva.s.s. We will suppose it just past high water, the yacht swinging ebb, and the wind up stream; we shall, therefore, have tide with us, and the wind against us. We now hoist the throat and peak halliards, till the former is well up block to block; then, by hauling at the peak-halliards till the after part of the sail is taut (tight), the mainsail is set, and she swings head to wind. The next thing is to hoist the forestaysail and the jib, which must be well purchased up, and the sheet well hauled in, before we can get her on the wind, _i. e._ sail close up to the wind. The ropes must now be coiled up, and hung on the cleat belonging to each. Our canva.s.s being now up, we may cast off, slack out the mainsail, haul in jibsheet on the contrary tack to which we intend to sail, and we are under weigh.

We have already told the reader that "starboard" means right, and "port"

means left. Formerly, the word "larboard" was used for left; but, owing to the similarity between the two words starboard and larboard, the word port was subst.i.tuted for the latter. A boat is said to be on the starboard tack, when the wind is blowing from the starboard side; the port side is then called the lee side, and the starboard the weather side. She is on the port tack when the wind blows from the port side, which is then called the weather side, and the starboard the lee side.

When in steering she is brought nearer the wind, she is said to "luff;"

and when further from it, to "bear away." When the helm is put so as to cause the boat to luff, the helm is "put up;" when it causes the boat to bear away, it is "put down," or a-lee.

Proceeding to our cruise, we must haul the jib-sheet well in, put the helm up, and sail close to the wind; as, the wind being against us, we shall have to "beat up," that is, sail in a zigzag direction. In sailing close to the wind, we must always take care _not to sail too close, but always keep the canva.s.s quite full_. Upon the skill of the steersman, mainly depend the motions of the boat; he must endeavour to attain the happy medium of keeping the boat close to the wind, and yet not allowing the canva.s.s to shake. The practised yachtsman feels with his helm every variation of the wind, and meets it with a turn to port or starboard; but the young sailor would do well to watch the colour at the masthead, and, by keeping it in a line with the gaff, he will not steer very wildly. We are now getting near the opposite bank from whence we started, and must therefore tack. If the boat is quick in stays (_i.

e._ will go round quickly), and the bottom is not muddy, and is deep enough for the boat, we may go pretty close to the bank before we tack; but if she is a slow tub, we must begin in good time. First, we must see that all the canva.s.s is quite full; then the mainsail must be hauled to the middle of the boat, or amidships, and the helm put gradually down.

When she is head to wind, let fly the jibsheet; if she is on the starboard tack, haul in the port foresheet taut, which is called backing the foresail; the wind, by blowing on the foresail, a.s.sists the boat round. When she begins to fill on the other tack, cast off the port (now the weather) foresheet, and haul in the leesheet and also the jibsheet, and trim the mainsail (_i. e._ let go, or haul in, the mainsheet), according to the direction of the wind. If when the boat is in stays, or head to wind, she moves neither way, put the helm amidships; if she moves back, put the helm the contrary way to what you had it before, resuming its former position when she moves on again. When the wind gets more on our beam (_i. e._ blows directly across us), we may slack out the canva.s.s a little; the more aft it blows, so much more we must square our sails. There is a heavy cloud in the wind's eye, that admonishes us that a squall is brewing, and the dark ripple of the water to windward tells us that it will soon be here. Keep her well full, that as the squall strikes her she may have good way on; and luff into the wind as soon as the squall begins: and if she does not right at once, let go jib and foresheets; if that fails, cast off the mainsheet, and send a hand to stand by the fore and jib halliards, which must be let go when the squall becomes violent. We must now reef the mainsail; to effect this, allow plenty of room for driving to leeward; set taut the "topping-lift," a rope which hoists up the end of the boom; lower the halliards; hook at the end of the boom an earring which is higher up in the sail, and tie up the reef-points; then, having set up our mainsail, hoisted a smaller jib, and drawn in the foresheet, we are under sail again.

We must take care always to observe the rules of sailing, when meeting with another yacht. Whichever boat is running free must make way for one close hauled; for a boat when close hauled cannot conveniently alter her course, but when she is running free she is always able to move to which side she pleases. As we get into wider water, we shall find more swell, that impedes the boat to windward; but, if the waves be long enough, there is a way of easing her over them, by putting down the helm slightly, just before the highest of them strikes her bow; thus, by stopping the boat's way, she strikes the sea with less violence.