Yachting Volume I Part 34

As decks, when cared for, are always varnished when a yacht is laid up for the winter, this varnish has necessarily to be removed prior to a start on a season's yachting. The best method by which this can be carried out is as follows:--Black ashes, Sooji Mooji, or one of the many preparations of caustic potash, should be procured from a ship-chandler, and mixed in an iron bucket with warm water in the proportion of one-third black ashes to two-thirds water, according to the strength required. As soon as the sun has set the mixture must be poured over the deck, which must be left well covered with it till an hour before sunrise. The mixture, which will have dried during the night, must now be treated with hot water and well rubbed into the varnish, and fresh buckets of water must be kept applied till every particle of the mixture with the varnish has been cleared off and out of the deck planking. If the mixture is applied or allowed to remain on the deck while the sun is up, it will be certain to eat into and burn it.

There are two or three ways of laying decks. One is to have the planks nailed down to the beams, the nails countersunk, and the holes filled up with wood plugs to hide the nail-heads. This is generally done by men who have not had much to do with yacht-building. The common method employed is to drive the nails diagonally through the edge of the plank into the beam. Nails let in horizontally and driven into the next plank, two or three cotton threads having been placed between, keep the two planks in position. Each plank is similarly treated, and when all the planks have been fitted and jammed together, marine glue is poured into the seams. As soon as the glue has set and hardened the decks are planed, and finished off. The third method is not so pretty perhaps, but is believed from practical experience to be the best. The planks are mortised together, varnished, and then brought tight up.

The whole deck is often built and made ready to fit before it is put into position, so that when it is laid on the beams, all that is required is to nail it down into its place. The writer has had experience with the second kind of deck mentioned here in nearly all of his yachts, and of the third method of laying decks in the 'Cyprus.' She was about five years old when he bought her, and that is a good age for a racing 5-tonner's decks to last sound and without a leaky spot to be found anywhere. Her decks were certainly kept varnished, for the simple reason stated above, that visitors might be always welcome, no matter what description of foot-gear had been supplied to them by their bootmakers.

It is not an uncommon practice to have a yacht recoppered, though her copper may be in good condition and even new. When such a proposition is made, which is not infrequently done by skippers wishing to play into the yacht-builder's hands, and thinking more of their own pockets than their master's interests, the yachtsman must remember that every time his yacht is coppered her skin is made more porous, and she herself heavier in the water, since the planking will naturally sodden with greater rapidity.

If the incipient yachtsman has bought the hull and spars of a yacht that is only partially built or finished off, a few more hints must be added, which will give him food for reflection, and may prove of service.

When a yacht likely to suit has been heard of, nothing being known of the owner, the next thing should be to try to discover whether she is sound or possesses any weak places. The purchaser should overhaul her outside just below the channels, and examine if the yacht has been frequently caulked between the seams of the planking, or if there are any signs of weeps of any kind about that part or elsewhere. The weeps will be shown most likely by a rusty discolouration. If the yacht is coppered, wrinkles must be looked for under the channels, runners, and about the bilge. They will show if the yacht has been strained at all.

A knife should next be taken, and the point driven into the planking about the water-line, where it joins the sternpost and stem, and then along the two lower garboard strakes, especially if cement has been used to fill in between the keel and planking, to discover if there is any sign of dry rot, sap rot, &c. Inside, under the cabin floor, the timbers, deadwoods, and the garboard strakes if the yacht be coppered, should be tested in the same way. If the yacht has iron floors, these should be carefully examined for galvanic action or decay. The heads of the bolts which go through the lead keel should be sc.r.a.ped to see whether they are made of iron, metal composition, or copper. If they are iron or steel, most likely they will require to be renewed, because galvanic action is very soon set up between the lead and steel. Outside, copper shows wear and tear more quickly near the stem and sternpost and along the water-line. In the cabin itself the deck ceiling should be examined for weeps and leaks, especially about the bits forward and near the mast, also wherever a bolt-head is visible.

On deck, a look round the covering board will discover whether it has been often recaulked, by the seam being extra wide. The heat of a stove below is frequently the cause of the deck forward leaking. The deck seams should not be wider there than at any other part. All the spars should be examined, and if there are no transverse cracks, longitudinal ones may be held of no consequence. The weak parts of the mast are generally to be found between the yoke and cap, where the eyes of the rigging rest. Rot is often found there, and strains are met with up the masthead. The boom shows its weakness at the outer end by small cracks, and the bowsprit by the gammon iron and stem-head. If the above rough survey proves all correct, attention must be given next to the rigging, sails, and gear. Wear in the wire rigging is shown by its being rusty, the strands stretched, or by the broken threads of a strand appearing here and there. If the jib, throat, peak halliards, and mainsheet are new, or have seen the work of one season only, they will not require much overhauling. With the other running rigging the strands should be untwisted, just enough to see whether the heart of the rope is fresh and not rotten. The blocks ought to be of a light colour without cracks in them, and iron strapped inside.

The sails will not show either mildew marks or discolouration if they are in good condition. The chain and anchors to be in good order should not be rusty, but clean and well galvanised. They should be looked at to discover whether they have ever been regalvanised. This will be noticed by the links presenting a rough, uneven surface, where there was rust or decay before the repet.i.tion of the process of galvanising.

Sometimes at fitting-out time an owner finds that he has to provide his yacht with a new anchor. It may help him, therefore, in his choice if the writer gives his experience in the matter of ground tackle or mud-hooks. There are a number of patents in the market, the most patronised of which are Trotman's, Martin's, Smith's, and Thomas & Nicholson's. All these have many good points, with a weak one here and there to keep the compet.i.tion in anchor designing open to improvement.

Trotman's anchor has movable arms and stock, stows away well, and is a fine holding anchor when once it bites; but it is often very slow at catching hold, and this is dangerous when the anchorage happens to be close and crowded, as, for instance, is frequently the case at Kingstown, Cowes, &c., during regatta time. If the anchor does not catch at once on such occasions the yacht may drift some distance before she is brought up, and with little room this operation is performed, more often than not, by collision with some vessel astern.

The Martin anchor and the Smith both work on a different principle from any of the others, in that their arms move together so as to allow both flukes to act at the same time. Of the two the Smith, which has no stock, is preferable for yacht work. The Martin has a stock which is fixed on the same plane with the arms. Both anchors catch quickly and hold well as long as the bottom is not rocky or very uneven, when they are apt to get tilted over and lose any hold they may have at first obtained. Their worst failing is that of coming home under the following conditions. If the yacht yaws about, owing to strong tides, winds, or boisterous weather, the flukes of the anchor are p.r.o.ne, when working in their holes, to make them so large that they gradually meet each other and finally become one big hole; the anchor then invariably trips, comes home, and the yacht drags. On the other hand, the Smith and Martin anchors stow away better than any others, and when on deck lie flat and compact. The Smith anchor makes a capital kedge. Its holding power is so great that it is not necessary to carry one of anything like the weight that would be required were any other patent anchor employed.

The great point in favour of Smith's over that of Martin's anchor is that, should it foul a mooring or warp, it can be easily tripped. The tripping is done by letting the bight of a bowline slip down the chain and anchor till it reaches the arms, and then hauling on it.

The best of the patents, however, is an anchor that was brought out some years ago by Messrs. Thomas & Nicholson, of Southampton and Gosport. It can be stowed away in a very small s.p.a.ce, since the arms are removable. It is a quick catcher, and is, at the same time, very powerful and trustworthy.

The arms stand out at the most effective angle for insuring strength of grip, while the shank is long, and, though light and neat-looking--it is flat-sided--has sufficient weight and substance in it to stand any ordinary crucial test. The flukes from their shape appear somewhat longer in proportion to their width than the usual patterns; but this arises from the sides being slightly bent back, with the object of making the fluke more penetrating, which it certainly is.

The old fisherman's anchor with a movable stock is, after all, as good an anchor as any yachtsman need want. It is not a patent, and is accordingly very much less expensive. Should necessity ever compel the making of a small anchor, then the two great points which it must possess are, length of shank (because greater will be the leverage), and the placing of the arms so that they do not make a less angle with the stock than, say, 53. After a long practical experience with almost every kind of anchor, the writer believes that two good, old-pattern fisherman's anchors, with movable stocks (the movable stock was a Mr. Rogers' patent), are all that any yacht need require or her mud-hooks; but if it is thought fit to have patent anchors, then either a couple of Thomas & Nicholson's anchors, or one of these and a Smith, ought to form the yacht's complement.

All being satisfactory, if the yacht is a 5-rater the first thing to be done will be to have the lugsail altered into a gaff-mainsail for handiness sake. This will be only a small expense, since the great peak of the lugsail will allow of its head being squared. Very little if anything need be taken off the head of a high-peaked lugsail when the gaff employed is hinged on to the jaws, as such a gaff can be peaked with far greater ease and to a much greater extent than when fitted in the ordinary. The writer has employed the following method for fitting up the interior accommodation of a 5-ton yacht, and he can highly recommend it as most convenient, and at the same time handy to clear out either on a racing day or when about to lay the yacht up:--All woodwork, such as lockers or fore-and-aft boards (used for turning the sofas into lockers), should be fixed in their places by hooks, or at any rate by screws. Nothing should be a fixture except the two sofa-seats in the main cabin, the one forward of the mast, and the two sideboards fitted aft at each end of the sofas. If the yacht has to race, these sideboards should be made self-contained, and to shape, so that they may fit into their places and be kept there by hooks or catches. There should be only a curtain forward between the forecastle and main cabin, and instead of a regular solid bulkhead aft, gratings should take its place, with one wide grating as a door.

This will keep the store room aft ventilated. If there is sufficient length to permit of transverse gratings about 20 inches apart and 2 feet high by the mast, as before explained when describing the 'Lorelei,' by all means let these form one of the fittings to hold the sail bags. In the locker astern of the after bulkhead gratings, the skin should be protected by battens 2-1/2 to 3 inches wide and from 1 to 2 inches apart. This will keep whatever is stowed there dry from any little weep or leakage that may occur in the planking. There should be no ceiling either in the main or fore cabin, and if battens are thought necessary to prevent damp getting to the beds when left folded up in the bed-frames, then three, or at the outside four, some 4 or 5 inches apart, should be screwed up just in the position where the shoulders of a sitter would be likely to rest against them. Four or five may be fitted up on each side of the forecastle. The upper batten should be higher up than the top one in the main cabin, as it may be useful for s.c.r.e.w.i.n.g hooks into. The writer, however, prefers in the main cabin, instead of any battens, clean pieces of duck, or, what is better still, Willesden cloth (waterproof), made to hang loosely from hooks, reaching down to the sofas, and cut to the shape of the after sideboards, holes being sewn in to allow the iron hooks which carry the bed-frames to come through. This fitting always lightens up the cabin, and is easily taken down and scrubbed.

For beds, the iron frames supplied to all yachts' forecastles for the men, with canvas bottoms to them, are far the best and most comfortable. They take up less room than a hammock, and stow away nicely against the cabin's side when not in use. With these frames the writer has used quilted mattresses, the heads of which have ticking covers large enough to hold a pillow, and the whole is sewn on to strong American or waterproof cloth, which forms a covering when the bed and its blankets are rolled up and have to be stowed away.

In the forecastle, a movable pantry may be screwed up against the battens on the port side (the bed will be on the starboard side). This should be an open case with three shelves and two drawers underneath.

The upper shelf must be divided off to take the three sizes--dinner, soup, and small plates. Between the plates, outside the divisions, there can be uprights on which to thread double egg-cups. On the lower shelf there should be holes cut to carry tumblers, and between the tumblers slots for winegla.s.ses. The bottom shelf is for cups and saucers. One of the drawers ought to be lined with green baize to hold silver plate and knives. If the sideboards aft are fixtures, a tin case made to the shape of the yacht's side, to rest on the part of the sideboard on which the lid hinges, and reaching up to the deck, is a capital fitting to have. The inside should be arranged in part.i.tions to hold tea, coffee, sugar, biscuit, and other square canisters, also Dutch square spirit bottles. The door may be double, or if single, should open from the bottom and trice up to a hook overhead, so that it may not in any way hinder the opening of the sideboard lid at the same time. Two or three movable shelves placed right in the eyes of the yacht forward make useful stowage room for a man to keep his clothes, as there they stand less chance of getting wet. Between the sideboards aft a removable box ought to be fixed with screws, of sufficient depth to hold an iron bucket, washing basin, and all the conveniences of a lavatory. This will be directly under the cabin hatch, and from 8 to 10 inches abaft it. The lid should leave a few inches s.p.a.ce clear to receive it when opened back. Curtains made of duck or Willesden cloth, to hang down loose over the sideboards at each side to the depth of 6 inches, and hung from hooks in the deck above, will be found useful for keeping all stray splashes, that may fall inboard, from going on the sideboard lids, and thence among the dry goods and provisions stowed away in them. At the back of the lavatory box will be the after-grating and locker, and standing out from the grating, about 10 inches to a foot square, and 15 to 18 inches deep from the deck, there should be a cupboard, painted white inside, or, better still, lined with copper silver-plated to reflect the light, and a transparent spirit compa.s.s should then be fitted to hang through the deck above it. The bra.s.s rim for carrying the gimbles and binnacle lid outside must be screwed down to the deck on doubled india-rubber to prevent leakage. The cupboard door must have ventilating holes in it at the top and bottom, and a square hole to hold the lamp should be cut in the door between the upper and lower ventilators. On the opposite side from that on which the tin case is fixed, and coming out from the grating the same distance as the compa.s.s box, two bookshelves can be fitted, which will prove most useful. On deck, the fittings and leads that are mentioned in the description of the 'Cyprus' cannot be improved upon, except that rigging screws are neater, and give less trouble than dead-eyes and lanyards, which have to be continually set up. Lanyards, however, give more life to a mast, though it may appear almost imperceptible, and by so doing ought to render it less liable to be carried away. The sliding lid of the companion hatch should padlock on to a transverse part.i.tion between the combings, and it is a good plan to have this part.i.tion on hinges, so that at night, when the hatch-cover is drawn over, the part.i.tion may lie on the deck and so leave an aperture for ventilation. The windows of the skylight will be all the better for being fixtures and should not open; if ventilation be required, the whole skylight can be taken off; this will prevent the leakage so common with hinged windows. A mainsheet horse and traveller with two quarter leading blocks are better than a double block shackled on to an eyebolt amidships, because a more direct up and down strain can be obtained when the boom is well in.

In any yacht of 25 feet in length or under, the wisest plan to adopt with regard to a forehatch is to do away with it and only have a large screw deadlight; if a small deadlight be preferred, then it ought to be placed about 12 to 18 inches ahead of the bits, and a copper cowl, to screw into the deadlight frame, should form part of the fittings, for use when the yacht is laid up, in order to let air into and so ventilate the cabin. It is certainly a great advantage to have the spinnaker ready in the forecastle for sending up through a hatch, but as this is the only good reason why a hatch should be thought requisite in a small yacht, and since it is a fruitful source of leakage and danger, especially when, as is sometimes the case, the lid has not been fastened down and a sea sweeps it off the deck, it is better to abolish the fitting altogether. A small rail ahead of the mast, bolted through the deck and stayed to the mast below (in order to take off all weight from the deck and beams), and a rail abreast of the lee and weather rigging, should form all that is required for belaying halliards, purchases, tacks, &c. In most of the 5- and 2-1/2-raters the halliard for the lugsail is led below the deck, and the purchase is worked by taking turns round a small mast-winch in the cabin. It is a great advantage to have a clear deck free from ropes, and it would be a saving of labour to have all a cutter's purchases led below to a winch.

For a small yacht it is as well to have the jib, throat, and peak halliards of four-strand Manilla rope, but wire topsail halliards are a very decided improvement on hemp or Manilla. Wire has little or no stretch in it, and a topsail halliard is the last rope a seaman cares to disturb after it has once been belayed, it may be to lower and take in the sail. All purchases ought to be made of European hemp-rope, with the exception of that attached to the copper rod bobstay. All headsheets should lead aft and belay on cleats bolted on to the combing of the c.o.c.kpit. It is becoming the custom to have all the bowsprit fittings fixtures. A steel or copper rod from the stem to the cranze iron at the bowsprit end serves as a bobstay, which, with the shrouds, are screwed up with rigging screws. No such thing as reefing, or bringing the useless outside weight of the spar inboard, is thought of by many racing men now-a-days. Fiddle-headed and spoon bows have introduced this fashion, but 14 to 16 feet of a 5-1/2-inch spar is no trifle to have bobbing into seas, and making the boat uneasy, when half the length, or less, would be quite sufficient to carry all the jib that can be set. No bowsprit belonging to a straight-stemmed cutter should be a fixture, and the best and neatest fitting for the bobstay is a rod with a steel wire purchase at the end. The shrouds should be in two lengths of wire shackled together, as in topmast backstays, and, leading through the bulwark, should screw up to bolts in the deck especially formed to take a horizontal strain. Selvagee strops can be used for setting up the intermediate lengths.

If the eyes of the rigging are covered with leather which has not been painted, then the bight of each eye ought to be left standing in a shallow dish of oil. The leather will thus soak itself, and the oiling will preserve it from perishing.

In sending up rigging it must always be remembered that the lengths of the port and starboard rigging are arranged so as to allow of the starboard fore rigging being placed into position first, then that to port, the starboard backstay rigging going up next, followed by that to port, after which the eye of the forestay will go over the masthead and will rest on the throat halliard eyebolt in the masthead.

All block-hooks should be moused. A mousing is made by taking two or three turns of spunyarn round the neck and lip of the hook followed by a cross turn or two to finish off. This prevents the hook from becoming disengaged.

In some yachts double topmasts and double forestays are used. The former are only fitted where the yacht carries two sizes of jib-topsail, one for reaching and the other for beating to windward.

Whilst one is up, the other can be hooked on, so that no time need be lost in setting. A medium-sized sail, however, capable of being used for reaching or beating, is all that is really required. The shifting of two jib-topsails entails the presence for some time of one man at least forward on the bowsprit end, and the less the men are forward of the mast the better, if it is desired to get the best work out of a small yacht, and the yacht herself is in proper trim. There is more to be said, however, in favour of double forestays, since they allow of a foresail being sent up whilst another is already set and drawing, and the work is done inboard, while the difference between a working and a balloon foresail is far greater than in that of two jib-topsails. The writer has never used double forestays, but he believes so thoroughly in the foresail, as a sail, that he has always carried three--a working, reaching, and a balloon. He has the luff of each foresail fitted with loops at regular intervals, after the manner of gaiter lacings, otherwise called 'lacing on the bight.' These are made either of light wire or small roping. The upper loop reaches down to the next below it, so that the loop below may be pa.s.sed through, and so on, till the tack is reached. When setting a foresail the upper loop is pa.s.sed over the forestay before the lower one is threaded through it, and so on with all the loops in turn. The tack has a single part, which, after it has been pa.s.sed through the lowest loop, is made fast to the tack-downhaul. When shifting foresails, the sail is lowered, tack let go, and the lacing comes away by itself; then the new sail can be hooked on to the halliards and laced to the forestay as quickly as it can be hauled up. When the sea is smooth there may be no necessity for unlacing the working foresail should the shift have to be made from that sail, especially if it has soon to be called into use again. The above method will be found far superior to that of hanks, which are always getting out of order and not infrequently refuse to do their duty altogether.

In mentioning the shifting of sails, there is one point to which nothing like sufficient attention is paid, and that is to the lead of sheets. Many a good jib has been destroyed and pulled out of shape through a bad lead, and more than one race has been lost through the bad lead of a reaching or balloon foresail sheet. When jibs or foresails are changed, the greatest care should be taken to see that the leads told off for their sheets are really fair--that is, that the pull on the sheet does not favour the foot more than the leach of the sail, or _vice versa_. In the case of a balloon-foresail its sheet leads outside the lee rigging and belays somewhere aft. The man attending the sheet should take it as far aft as a direct strain will permit, and not belay it to the first cleat that comes to hand; otherwise the sail will simply prove a windbag taking the yacht to leeward rather than ahead.

There is a fitting which must not be pa.s.sed over that is now almost universally adopted on large yachts, but is equally important on small ones--that is, an iron horse at the main-boom end for the mainsail outhaul to travel on. It was originally invented by that most skilful helmsman Mr. W. Adams, of Greenock, to obviate a difficulty so common in square stern boats with booms stretching to _n_ length over the transom. He fitted the boom of his little racing boat with a horse, which came from the boom end to within easy reach for unhooking the clew of the sail, and so saved the trouble of having to use a dinghy for the purpose. The idea was soon taken up by Clyde yachtsmen, for it was found so much easier to get the mainsail out on the boom than with the traveller working on the boom itself.

Whilst on a subject connected with mainsails, the writer can recommend for the gaff and head of the mainsail, instead of the ordinary long rope lacing commonly in use, separate stops or seizings to each eyelet-hole. The seizing can be done in half the time it takes to properly lace the head of the sail to the spar; it looks quite as well and does its work better. For fastening the luff of the mainsail to the mast-hoops, instead of seizings he has used hanks, and has found them very handy and neat. The hanks used are riveted on to the mast-hoops. He has now had them in constant use for over twelve years, and has never had occasion to find any fault whatever with them. In one yacht he kept two mainsails in use for cruising and racing, and thus preserved the racing mainsail in good condition for a considerably longer period than would otherwise have been the case, and with the fittings just named the shift of sails was a small matter.

Topsails, perhaps, are the sails which require renewing more frequently than any other, as they get out of shape so quickly if very much is demanded from them. For a small yacht, if she carries a topmast, three topsails are a sufficient outfit. They should be a jibheader, a gaff, and a balloon or jackyarder. One yard ought to serve for both the gaff and jackyard topsail, and these sails should be made the same length on the head. This will save having to carry about a deckload of timber.

OUTFIT

It is frequently a question of great moment, what kind and what amount of outfit it is necessary to take away on a summer's cruise, and the writer finds it a great convenience to keep a list of everything that goes to form not only his sea kit, but stores and necessaries as well.

Such a list prevents one from forgetting small necessaries.

A small air-tight 'uniform tin case' and a painted seaman's bag are the best equipment for carrying clothes. The lists are as follows:--

FIRST LIST: THE KIT

The tin case holds--

A dress suit and shoes A sh.o.r.e-going suit 3 linen shirts 6 collars White ties Gloves Ink, blotting paper, paper and envelopes Mr. Lloyd's Euxesis

As may be seen, the tin box only contains the sh.o.r.e-going outfit. The Euxesis mentioned is for those who shave, as with it there is no need of hot water to perform the operation.

In the bag should be--

4 flannel shirts 2 pairs of flannel pygamas 1/2 doz. pairs of socks, 2 pairs of which should be thick 2 pairs of thick warm stockings 1 pair of warm slippers 2 pairs of common blue india-rubber solid shoes 1 pair of brown leather shoes 2 blue guernseys, hand knit 4 bath towels and 1/2 doz. others Sponge bag Dressing case 1 suit of thick pilot cloth 1 old pair of thick blue trousers 1 large thick square comforter 1 common serge suit 1 pair of mittens 1 pair of tanned leather boots

For comfort in a small yacht it is impossible to do with less. Of course it may be thought foolish taking the tin case stocked as it is, but experience has taught that even in the wildest and most out-of-the-way spots occasions arise when all pleasure is spoiled by not having the evening change of kit at hand.

SECOND LIST: GROCERIES, ETC.

Matches 1/2 doz. boxes of floats for oil lamp 1/2 doz. boxes of night-lights 6 lbs. of candles 8 to the lb. and 2 bedroom candlesticks 1 doz. tins of unsweetened tinned milk 1 lb. of tea 1/2 doz. coffee and milk in tins 1/2 doz. tins of chocolate and milk Plate powder Varnish for yellow leather shoes Corkscrew Sardine-box opener 3-lb. tin of marmalade Pepper Mustard Jar of salt 1 doz. tins of sardines 3 tins of herring a la sardines 2 lb. captain's biscuits 1 doz. packages of jelly powder 6 doz. tinned soups Soap, 1 bar of common brown Soap, 1 bar of scented Wicks for stoves Plate, clothes, and boot brushes 2 chamois leathers. Cheese, b.u.t.ter, bread, 1/2 loaf per diem per man

THIRD LIST: YACHT NECESSARIES

Marlinespike p.r.i.c.ker Mop and twiddlers Hatchet Heavy hammer Small hammer Screw-driver Gimlet Bradawl Pincers Bra.s.s screws Copper nails Bra.s.s hooks 1 tin of black paint 1 tin of Harvey's Anti-fouling Paint 1 tin of Copal varnish Spare shackles, clip hooks, hooks and thimbles 1 4-lb. lead and line 1 can of methylated spirits 1 can of mineral oil 1 can of colza oil _Lamp_ showing red, white, or green, as required Riding light Binnacle and light 1 small-sized patent log 20 fathoms of Kaia gra.s.s warp 1 tail 4-in. block 2 spare blocks with hooks or thimbles 1 canvas bucket, medium size 1 iron bucket 2 bra.s.s holders for oil gla.s.s lamp, and to hold tumbler if required for flowers

4 thick common cups and saucers 1/2 doz. tumblers 1/2 doz. winegla.s.ses 3 sodawater tumblers 1/2 doz. enamel plates 1/2 doz. enamel soup plates 2 enamel slop basins 2 enamel flat dishes 1 enamel double vegetable dish 1 deep dish for stews, &c.

3 tablespoons 3 table forks 3 table knives 1/2 doz. small forks 1/2 doz. dessert spoons 1/2 doz. teaspoons 1/2 doz. small knives Fish knife and fork 2 kitchen knives and forks 2 kitchen table- and 2 teaspoons

Binocular gla.s.ses Parallel rulers Compa.s.ses Isle of Man almanac Charts: Irish Sea, West Scotland, English Channel, &c.

Books of sailing directions Channel pilot Flags: Club Burgee, Pilot Jack, and Ensign. The Pilot Jack is useful in case a pilot be required, and the Ensign to hoist upside down in case of distress, or in the rigging as a protest when racing Fishing tackle

Medicine:--

Brandy Friar's balsam Lint Bottle of Condy's fluid Carlsbad salts

[Ill.u.s.tration: COMMERCIAL CODE OF SIGNALS.