Home

On the Economy of Machinery and Manufactures Part 14

On the Economy of Machinery and Manufactures - novelonlinefull.com

You’re read light novel On the Economy of Machinery and Manufactures Part 14 online at NovelOnlineFull.com. Please use the follow button to get notification about the latest chapter next time when you visit NovelOnlineFull.com. Use F11 button to read novel in full-screen(PC only). Drop by anytime you want to read free – fast – latest novel. It’s great if you could leave a comment, share your opinion about the new chapters, new novel with others on the internet. We’ll do our best to bring you the finest, latest novel everyday. Enjoy

6. A surface-captain, with a.s.sistants, receives the ores raised, and directs the dressing department, the object of which is to render them marketable.

7. The head carpenter superintends many constructions.

8. The foreman of the smiths regulates the ironwork and tools.

9. A materials man selects, purchases, receives and delivers all articles required.

10. The roper has charge of ropes and cordage of all sorts.

Notes:

1. An Enquiry into the Nature and Causes of the Wealth of Nations, by Adam Smith.

2. Note sur la publication, proposee par le gouvernement Anglais des grandes tables logarithmiques et trigonometriques de M de p.r.o.ny De l'imprimerie de F. Didot, December 1, 1829, p. 7

3. Since the publication of the second edition of this work, one portion of the engine which I have been constructing for some years past has been put together. It calculates, in three columns, a table with its first and second differences. Each column can be expressed as far as five figures, so that these fifteen figures const.i.tute about one ninth part of the larger engine. The ease and precision with which it works leave no room to doubt its success in the more extended form. Besides tables of squares, cubes, and portions of logarithmic tables, it possesses the power of calculating certain series whose differences are not constant; and it has already tabulated parts of series formed from the following equations:

The third differential of ux = units figur of delta ux

The third differential of ux = nearest whole no. to (1/10,000 delta ux)

The subjoined is one amongst the series which it has calculated:

0 3,486 42,972 0 4,991 50,532 1 6,907 58,813 14 9,295 67,826 70 12,236 77,602 230 15,741 88,202 495 19,861 99,627 916 24,597 111,928 1,504 30,010 125,116 2,340 36,131 139,272

The general term of this is,

ux = (x(x-1)(x-2))/(1 X 2 X 3) + the whole number in x/10 + 10 Sigma^3 (units figure of (x(x-1)/2)

Chapter 21

On the Cost of Each Separate Process in a Manufacture

253. The great compet.i.tion introduced by machinery, and the application of the principle of the subdivision of labour, render it necessary for each producer to be continually on the watch, to discover improved methods by which the cost of the article he manufactures may be reduced; and, with this view, it is of great importance to know the precise expense of every process, as well as of the wear and tear of machinery which is due to it. The same information is desirable for those by whom the manufactured goods are distributed and sold; because it enables them to give reasonable answers or explanations to the objections of enquirers, and also affords them a better chance of suggesting to the manufacturer changes in the fashion of his goods, which may be suitable either to the tastes or to the finances of his customers. To the statesman such knowledge is still more important; for without it he must trust entirely to others, and can form no judgement worthy of confidence, of the effect any tax may produce, or of the injury the manufacturer or the country may suffer by its imposition.

254. One of the first advantages which suggests itself as likely to arise from a correct a.n.a.lysis of the expense of the several processes of any manufacture, is the indication which it would furnish of the course in which improvement should be directed. If a method could be contrived of diminishing by one fourth the time required for fixing on the heads of pins, the expense of making them would be reduced about thirteen per cent; whilst a reduction of one half the time employed in spinning the coil of wire out of which the heads are cut, would scarcely make any sensible difference in the cost of manufacturing of the whole article. It is therefore obvious, that the attention would be much more advantageously directed to shortening the former than the latter process.

255. The expense of manufacturing, in a country where machinery is of the rudest kind, and manual labour is very cheap, is curiously exhibited in the price of cotton cloth in the island of Java. The cotton, in the seed, is sold by the picul, which is a weight of about 133 lbs. Not above one fourth or one fifth of this weight, however, is cotton: the natives, by means of rude wooden rollers, can only separate about 1 1/4 lb. of cotton from the seed by one day's labour. A picul of cleansed cotton, therefore, is worth between four and five times the cost of the impure article; and the prices of the same substance, in its different stages of manufacture, are--for one picul:

Dollars Cotton in the seed 2 to 3 Clean cotton 10 to 11 Cotton thread 24 Cotton thread dyed blue 35 Good ordinary cotton cloth 50

Thus it appears that the expense of spinning in Java is 117 per cent on the value of the raw material; the expense of dying thread blue is 45 per cent on its value; and that of weaving cotton thread into cloth 117 per cent on its value. The expense of spinning cotton into a fine thread is, in England, about 33 per cent. (1*)

256. As an example of the cost of the different processes of a manufacture, perhaps an a.n.a.lytical statement of the expense of the volume now in the reader's hands may not be uninteresting; more especially as it will afford an insight into the nature and extent of the taxes upon literature. It is found economical to print it upon paper of a very large size, so that although thirty-two pages, instead of sixteen, are really contained in each sheet, this work is still called octavo.

L s. d.

To printer, for composing (per sheet of 32 pages) L3 1s. 10 1/2 sheets 32 0 6 [This relates to the ordinary size of the type used in the volume.]

To printer for composing small type, as in extracts and 2 0 3 contents, extra per sheet, 3s. 10d.

To printer, for composing table work, extra per sheet, 2 17 9 5s. 6d.

Average charge for corrections, per sheet, L3 2s. 10d. 33 0 0 Press work, 3000 being printed off, per sheet, L3 10s. 36 15 0 Paper for 3000, at L1 11s. 6d. per ream, weighing 28 lbs: the duty on paper at 3d. per lb. amounts to 7s. per ream, so that the 63 reams which are required for the work will cost:

Paper 77 3 6 Excise Duty 22 1 0 Total expense of paper 99 4 6

Total expense of printing and paper 205 18 0 Steel-plate for t.i.tle-page 0 7 6 Engraving on ditto, Head of Bacon 2 2 0 Ditto letters 1 1 0 Total expense of t.i.tle-page 3 10 6 Printing t.i.tle-page, at 6s. per 100 9 0 0 Paper for ditto, at 1s. 9d. per 100 2 12 6 Expenses of advertising 40 0 0 Sundries. 5 0 0

Total expense in sheets 266 1 0

Cost of a single copy in sheets; 3052 being printed, including the overplus 0 1 9 Extra boarding 0 0 6

Cost of each copy, boarded(2*) 0 2 3

257. This a.n.a.lysis requires some explanation. The printer usually charges for composition by the sheet, supposing the type to be all of one kind; and as this charge is regulated by the size of the letter, on which the quant.i.ty in a sheet depends, little dispute can arise after the price is agreed upon. If there are but few extracts, or other parts of the work, which require to be printed in smaller type; or if there are many notes, or several pa.s.sages in Greek, or in other languages, requiring a different type, these are considered in the original contract, and a small additional price per sheet allowed. If there is a large portion of small type, it is better to have a specific additional charge for it per sheet. If any work with irregular lines and many figures, and what the printers call rules, occurs, it is called table work, and is charged at an advanced price per sheet. Examples of this are frequent in the present volume. If the page consists entirely of figures, as in mathematical tables, which require very careful correction, the charge for composition is usually doubled. A few years ago I printed a table of logarithms, on a large-sized page, which required great additional labour and care from the readers,(3*) in rendering the proofs correct, and for which, although new punches were not required, several new types were prepared, and for which stereotype plates were cast, costing about L2 per sheet. In this case L11 per sheet were charged, although ordinary composition, with the same sized letter, in demy octavo, could have been executed at thirty-eight shillings per sheet: but as the expense was ascertained before commencing the work, it gave rise to no difficulties.

258. The charge for corrections and alterations is one which, from the difficulty of measuring them, gives rise to the greatest inconvenience, and is as disagreeable to the publisher (if he be the agent between the author and the printer), and to the master printer or his foreman, as it is to the author himself. If the author study economy, he should make the whole of his corrections in the ma.n.u.script, and should copy it out fairly: it will then be printed correctly, and he will have little to pay for corrections. But it is scarcely possible to judge of the effect of any pa.s.sage correctly, without having it set up in type; and there are few subjects, upon which an author does not find he can add some details or explanation, when he sees his views in print.

If, therefore, he wish to save his own labour in transcribing, and to give the last polish to the language, he must be content to accomplish these objects at an increased expense. If the printer possess a sufficient stock of type, it will contribute still more to the convenience of the author to have his whole work put up in what are technically called slips,(4*) and then to make all the corrections, and to have as few revises as he can.

The present work was set up in slips, but the corrections have been unusually large, and the revises frequent.

259. The press work, or printing off, is charged at a price agreed upon for each two hundred and fifty sheets; and any broken number is still considered as two hundred and fifty. When a large edition is required, the price for two hundred and fifty is reduced; thus, in the present volume, two hundred and fifty copies, if printed alone, would have been charged eleven shillings per sheet, instead of 5s. 10d., the actual charge. The principle of this mode of charging is good, as it obviates all disputes; but it is to be regretted that the custom of charging the same price for any small number as for two hundred and fifty, is so pertinaciously adhered to, that the workmen will not agree to any other terms when only twenty or thirty copies are required, or even when only three or four are wanted for the sake of some experiment. Perhaps if all numbers above fifty were charged as two hundred and fifty, and all below as for half two hundred and fifty, both parties would derive an advantage.

260. The effect of the excise duty is to render the paper thin, in order that it may weigh little; but this is counteracted by the desire of the author to make his book look as thick as possible, in order that he may charge the public as much as he decently can; and so on that ground alone the duty is of no importance. There is, however, another effect of this duty, which both the public and the author feel; for they pay, not merely the duty which is charged, but also the profit on that duty, which the paper-maker requires for the use of additional capital; and also the profit to the publisher and bookseller on the increased price of the volume.

261. The estimated charge for advertis.e.m.e.nts is, in the present case, about the usual allowance for such a volume; and, as it is considered that advertis.e.m.e.nts in newspapers are the most effectual, where the smallest pays a duty of 3s. 6d., nearly one half of the charge of advertising is a tax.

262. It appears then, that, to an expenditure of L224 necessary to produce the present volume, L42 are added in the shape of a direct tax. Whether the profits arising from such a mode of manufacturing will justify such a rate of taxation, can only be estimated when the returns from the volume are considered, a subject that will be discussed in a subsequent chapter.(5*) It is at present sufficient to observe, that the tax on advertis.e.m.e.nts is an impolitic tax when contrasted with that upon paper, and on other materials employed. The object of all advertis.e.m.e.nts is, by making known articles for sale, to procure for them a better price, if the sale is to be by auction; or a larger extent of sale if by retail dealers. Now the more any article is known, the more quickly it is discovered whether it contributes to the comfort or advantage of the public; and the more quickly its consumption is a.s.sured if it be found valuable.

It would appear, then, that every tax on communicating information respecting articles which are the subjects of taxation in another shape, is one which must reduce the amount that would have been raised, had no impediment been placed in the way of making known to the public their qualities and their price.

NOTES:

1. These facts are taken from Crawford's Indian Archipelago.

2. These charges refer to the edition prepared for the public, and do not relate to the large paper copies in the hands of some of the author's friends.

3. Readers are persons employed to correct the press at the printing office.

4. Slips are long pieces of paper on which sufficient matter is printed to form, when divided, from two to four pages of text.

5. Chapter 31.

Chapter 22

Please click Like and leave more comments to support and keep us alive.

RECENTLY UPDATED MANGA

Martial God Asura

Martial God Asura

Martial God Asura Chapter 6140: Meeting Red Cloak Again Author(s) : Kindhearted Bee,Shan Liang de Mi Feng,善良的蜜蜂 View : 57,342,981
My Girlfriend is a Zombie

My Girlfriend is a Zombie

My Girlfriend is a Zombie Chapter 823: Secrets Beneath the Ruins Author(s) : Dark Litchi, 黑暗荔枝, Dark Lychee View : 2,280,614
Legend of Swordsman

Legend of Swordsman

Legend of Swordsman Chapter 6352: Nine Physical Forms Author(s) : 打死都要钱, Mr. Money View : 10,248,136

On the Economy of Machinery and Manufactures Part 14 summary

You're reading On the Economy of Machinery and Manufactures. This manga has been translated by Updating. Author(s): Charles Babbage. Already has 616 views.

It's great if you read and follow any novel on our website. We promise you that we'll bring you the latest, hottest novel everyday and FREE.

NovelOnlineFull.com is a most smartest website for reading manga online, it can automatic resize images to fit your pc screen, even on your mobile. Experience now by using your smartphone and access to NovelOnlineFull.com