Obed Hussey Part 9

Now if C. H. McCormick's testimony in his own favor, can be considered reliable, he certainly had not _invented_ a seat for his raker as late as 1845--and not long prior to 1847, when he patented it; and just _fourteen years_ after Hussey had used it _every year_, successively. The raker's seat therefore was just as _original_ an invention as the reel.

The "straight sickle blade," but cut one way only, and abandoned some 10 or 12 years after its conception in 1831, as he states, appears to be the only original idea--properly belonging to whom it may--in the patent of 1834. As to the "foundation" of the machine, viz:--the platform, cog wheels, crank, etc., etc., they have been used by every projector in reaping machines, for a century.

A machine exhibited at the World's Fair in London, by C. H. McCormick, had the "straight sickle blade," but alternating the cuts every few inches. With such a machine it is impracticable to cut grain, much less gra.s.s, efficiently, divested of the reel. That plan has since been changed to a much more efficient blade, the scolloped edged sickle. That it was used in the Northwestern States by others several years previous to its adoption by C. H. McCormick, we believe admits of just as little doubt, as rests with the priority of invention of the Reel, Rakers-seat, etc.

There is one other important feature, patented in 1845 and referred to in the Pusey letter;--an "Iron case to preserve the sickles from clogging;"

these we will also take a look into after a while.

Obed Hussey, as appears by the evidence before us, made his first machine in Cincinnati, Ohio, where he then resided, in the spring of 1833, and it was patented the same year.

[Sidenote: The Hussey Principle]

His principle--the arrangement and construction of the Guards and Knives--was precisely identical with those used by him at the present day, except an improvement patented in 1847, leaving openings at the back end of the slot in the guards for the escape of particles of straw or gra.s.s that might get in between the blades and guards.

It was communicated at the time by letter with a diagram to a personal friend now living, and of the highest respectability, from whom we have a certificate, and copy of the drawing. The knives or cutters, for lack of more suitable materials were made out of hand saw blades cut into suitable form, and riveted to a bar, vibrating through an opening or slot in the guards.

[Sidenote: An Early Experiment]

Judge Foster, residing within a few miles of the city, and to whom he applied, kindly offered him every facility to test the machine by cutting grain, ripe and unripe, being himself greatly interested in its success.

When taken to the field, a considerable number of persons were attracted to the spot; and rather to the discomfiture of the inventor, for it may well be supposed it was an anxious moment to him, and he desired _no witnesses to his failure_. The machine was started; but owing to some part giving away, or some slight defect not apparent until then, it failed to work satisfactorily. One burley fellow present picked up a cradle, and, swinging it with an air of great exultation, exclaimed, "this is the machine to cut the wheat!"

After the jeers and merriment of the crowd had somewhat subsided, the inventor remedied the defect, and a.s.sisted by the laborers present--the horses having been removed--pulled the machine to the top of an adjacent hill; when alone, he drew the machine down the hill, and through the standing grain, when it cut every head clean in its track!

The _same_ machine was directly afterwards exhibited before the Hamilton County Agricultural Society near Carthage, on the 2nd of July, 1833. Of its operation and success, the following statements, and certificates, now in our possession, sufficiently testify. Doctor Wallace as well as some others of the gentlemen, are living witnesses of what is here stated.

[Sidenote: Wallace Testimonial]

Cincinnati, November 20th, 1833.

This may certify that I was present on the 2nd day of July near Carthage, in this county, at an experimental trial with a machine invented by Mr. Obed Hussey for cutting grain. The operation was performed on a field of wheat. The machine was found to cut the wheat clean, and with great rapidity. But owing to its having been imperfectly made, being only constructed for the experiment, some parts of _wood_ which should have been made of iron, and in consequence frequently getting some parts out of order, a correct estimate of the quant.i.ty of work it would perform in a given time could not be made. One point was, however, satisfactorily established, that the principle upon which the machine is constructed will operate; and when well built will be an important improvement, and greatly facilitate the harvesting of grain. I would also remark that the horses moving the machine were walked, and trotted, and it was found to cut best with the greatest velocity.

C. D. WALLACE, Secretary of the Hamilton County Agricultural Society.

[Sidenote: Exceeded Expectations]

We, the undersigned, witnessed the exhibition of Mr. O. Hussey's Machine for cutting grain alluded to by Dr. Wallace, and do fully concur with his statement of its performance. We would further add, that notwithstanding its temporary construction, its performance far exceeded our expectations. Cutting the grain clean and rapidly, and leaving it in good order for binding. We are of the opinion that the machine is capable of being propelled at the rate of five miles the hour, and do good work. The machine was worked when the cutters were both in a sharp and a dull condition, and no difference could be perceived in its execution.

(Signed) "G. A. MAYHEW, T. R. SEBRING, A. CASTNER, JACOB WHITE, H. B. COFFIN, C. F. COFFIN, S. W. FOLGER, T. B. COFFIN, WM. PADDOCK."

There are several other certificates equally conclusive and satisfactory; but we will only copy in addition to the foregoing, a short piece from the _Farmer and Mechanic_, issued July 3d, 1833, in Cincinnati, as follows:

"Several members of the Agricultural Society on last Wednesday attended in Carthage to see a machine for cutting wheat by horse power, in operation. It was propelled by two horses, and cut as fast as eight persons could conveniently bind, doing the cutting neatly.

"This machine is the invention of Mr. O. Hussey, and will no doubt prove a useful addition to our agricultural implements. Mr. J. C. Ludlow suggested that it would be good economy of time and labor to take a threshing machine into the field and thresh out the grain as it is reaped, thereby saving the binding and hauling to the barn or stack. We think the suggestion a good one."

[Sidenote: The Problem Solved]

Here, then, was the problem solved--the great discovery made that had puzzled the brains of hundreds if not of thousands, and for centuries.

No one we fearlessly a.s.sert had ever succeeded so completely and satisfactorily, and with so simple and practical a machine.

Some visited the exhibition determined to condemn as they afterwards acknowledged, deeming the thing impracticable; but all were convinced; for the demonstration was of that character which left no room for doubt or cavil in the minds of any.

[Sidenote: A Great Triumph]

It was indeed a triumph,--not perhaps entirely unexpected to the inventor--but neither he, nor any one else at that early day, could foresee the wonderful changes ultimately to be effected, and the world-wide renown to be conferred on the inventor as the result of this experiment; one that was certain to immortalize his name as a pioneer and benefactor in the most useful and peaceful pursuits in life. It was too, the dawn of a brighter day to the toiling husbandman, by lightening his labors, and adding to his comfort and independence; only circ.u.mscribed in its beneficial influence by the bounds of civilization.

Some may possibly suppose that we view the invention in too glowing colors; but we have yet to meet with the farmer who owned a good reaping and mowing machine that would dispense with its advantages for twice the cost of the implement, and again be compelled to resort to the sickle, the cradle, and the scythe; for of a truth it completely supersedes all three in competent hands and with fair usage, in both the grain and gra.s.s crops.

[Sidenote: No Compet.i.tors Until 1841]

It is difficult to confine our narrative to its intended brief limits and select from the ma.s.s of evidence on hand as to the uninterrupted success off Hussey's invaluable invention from that day to the present--now twenty-one years. We will therefore only select a single and short account of each year; until about 1840 or '42; not long after which a few other inventors came before the public. There was, however, no compet.i.tor in the field from 1833 to 1841 or 1842, either in Europe or America, so far as we can ascertain, that did more than make a few occasional trials; none attracted public attention, or were successful and efficient machines even in the estimation of the projectors themselves. The evidence proves it, and it is corroborated by our own personal knowledge, having been constantly engaged in Agricultural and Mechanical pursuits for more than thirty years--and, as we believe, familiar with most of the important improvements of the age;--of all in fact, directly connected with agriculture in its labor saving implements, of any notoriety.

[Sidenote: No Reaping Machine Without Hussey Principle]

Many alleged improvements have been made in the Reaper in the past ten or twelve years; and many more still within half that period. How far they are new inventions, and actual _improvements_, we can better judge by examining Hussey's patent; for it describes the cutting apparatus clearly and minutely, and which in fact is the whole thing,--the "one thing needful" to success. For the use of wheels, or a system of gearing to all kinds of motive machinery is coeval with the first dawn of mechanical science. How ancient we know not, for the Prophets of old spoke of "wheels within wheels" near three thousand years ago; and it is very certain the hand of man, unaided by wheels and machinery, never erected the vast Pyramids and other structures of antiquity. We do not believe there is a single Reaping and Mowing machine in successful operation on this continent that is not mainly indebted to Hussey's invention in the cutting apparatus, for its success: deprive them of this essential feature--disrobe them of their borrowed plumes, and their success would be like the flight of the eagle, suddenly bereft of his pinions,--he must fall; and the machines would stand still, for not a farmer in the land would use them.

[Sidenote: The Guards]

As previously remarked, O. Hussey's first patent is dated in 1833. We omit the more general description of the machine, and copy only what embraces the most important features, the guards and knives; also an extract from his improvement patented in 1847, to obviate choking in the guards:

"On the front edge of the platform is fixed the cutting or reaping apparatus, which is constructed in the following manner: A series of iron spikes, and which I will call _guards_, are fixed permanently to the platform, and extend seven or eight inches, more or less, beyond the edge of the platform, parallel to each other, horizontal, and pointing forward. These guards are about three inches apart, of a suitable size, say three-quarters of an inch square, more or less, at the base, and lessening towards the points. The guards are formed of a top and bottom piece, joined at the point and near the back, being nearly parallel, and about one-eighth of an inch apart, forming a horizontal mortice or slit through the guard; these mortices being on a line with each other, form a continued range of openings or slits through the guards. The first guard is placed on the rear of the right wheel, and the last at the extreme end of the platform, and the intermediate guards at equal distances from each other, and three inches apart, more or less, from center to center.

[Ill.u.s.tration: Diagram Showing Arrangement of Guards and Knives]

[Sidenote: The Cutter]

"The cutter or saw (f) is formed of thin triangular plates of steel fastened to a straight _flat rod_, (g) of steel, iron or wood, one inch and a half wide; these steel plates are arranged side by side, forming a kind of saw with teeth three inches at the base, and four and a half inches long, more or less, sharp on both sides, and terminating nearly in a point. The saw is then pa.s.sed through all the guards in the aforesaid range of mortices, the size of the mortice being suited to receive the saw with the teeth pointing forward; observing always that the points of the saw teeth should correspond with the center of the guards. One end of the saw is connected with a pitman moved by a crank, and receiving its motion from the main axis, by one or two sets of cog wheels. The vibration of this crank must be equal to the distances of the centers of the guards, or the points of the saw teeth, or thereabouts, so when the machine is in motion, the point of each saw tooth may pa.s.s from center to center of the guards on each side of the same tooth at every vibration of the crank; if the main wheels are three feet four inches in diameter, they should in one revolution give the crank sixteen vibrations, more or less; the saw teeth should play clear of the guards, both above and below. * * *

[Sidenote: Operation]

"The power is given by locking the wheels to the main axis, the machine has one square wheel box, the other round and locked at pleasure. If the power should be wanted, one, two, or more horses are attached and driven on the stubble before the machine, the right wheel running near the standing grain, the platform with the saw in its front edge extends on the right, at right angles with the direction of the horses, with the guards and saw teeth presented to the standing grain--when the machine moves forward, the saw moves with the teeth endwise and horizontal, the grain or gra.s.s is brought between the guards, the saw teeth in pa.s.sing through the guards, cut the stalk while held both above and below the saw--the b.u.t.ts of the grain receive an impulse forward by the motion of the machine while in the act of being cut, which causes the heads of the grain to fall directly backwards on the platform--in this manner the platform receives the grain until a sufficient quant.i.ty is collected to make one or more bundles, according to the pleasure of the operator, then it is deposited with a proper instrument by the operator, _who may ride on the machine_."

Here follows the dimensions of a machine suited to two horses, which is only copied so far as refers to the cutting apparatus, viz: "The back of the saw may be from one inch to one and one-half inches wide, and from three-sixteenths to one-quarter of an inch thick; and the steel plates for the teeth should be about one-tenth of an inch thick; one end of the mortice in the guard should be fitted to receive the back of the saw, so that the bearing may be on the back of the saw only."

[Ill.u.s.tration: Gearing of Hussey's Early Reapers.]

[Sidenote: The Four Essentials]

"In this machine the following points are claimed as new and original: 1st. The straight horizontal saw, with the teeth sharp on their two sides for cutting grain. 2d. The guards forming double bearers above and below the saw, whereby the cutting is made sure, whether with a sharp or dull edge, the guards at the same time protecting the saw from rocks or stones, or other large substances it may meet with. 3d. The peculiar construction that the saw teeth may run free, whereby the necessary pressure and consequent friction of two corresponding edges cutting together, as on the principle of scissors, is entirely avoided. 4th. The peculiar arrangement by which the horses are made to go before the machine, being more natural, and greatly facilitating the use of the machine, and the general arrangement of the points as above described.

"In cutting gra.s.s, the platform is reduced in width, and the gra.s.s falls on the ground as it is cut."

In the improvement of the guards patented in 1847, the claim states: "I accordingly claim the opening above the blades A, fig. 3, and at D, fig.

1, in combination with vibrating blades. I also claim the particular application of the flush edge at the fork of the blades, for the purpose described.

"The end and design of the improvements above claimed is to prevent the blades choking."

[Sidenote: McCormick Twelve Years Late]