What Shall We Do Now?: Five Hundred Games and Pastimes Part 32

Collecting Stamps

Stamp-collecting is more interesting if money is kept out of it and you get your stamps by gift or exchange. The best way to begin is to know some one who has plenty of foreign correspondence and to ask for all his old envelopes. Nothing but time and patience can make a good collection. To buy it, is to have little of the collector's joy.

Postage-Stamp Snakes

Old American stamps can be used for making snakes. There is no need to soak the stamps off the envelope paper: they must merely be cut out cleanly and threaded together. A big snake takes about 4,000 stamps.

The head is made of black velvet stuffed with cotton wool, and beads serve for eyes. A tongue of red flannel can be added.

Puzzles

If you have a fret saw, and can use it cleverly, you can make at home as good a puzzle as any that can be bought. The first thing to do is to select a good colored picture, and then to procure from a carpenter a thin mahogany board of the same size. Mahogany is not absolutely necessary, but it must be some wood that is both soft and tough. Deal, for instance, is useless because it is not tough, and oak is useless because it is not soft. On this wood you stick the picture very firmly, using weak glue in preference to paste or gum. When it is quite dry you cut it up into the most difficult fragments that you can. It is best to cut out the border so that each piece locks into the next. This will then be put together first by the player and will serve to hold the picture together. After the puzzle is cut up it is well to varnish each piece with paper varnish, which keeps it clean and preserves it.

A simple puzzle can be made by pasting the picture on cardboard and cutting it up with scissors or a sharp knife.

Soap Bubbles

For blowing bubbles the long clay pipes are best. Before using them, the end of the mouthpiece ought to be covered with sealing-wax for about an inch, or it may tear your lips. Common yellow soap is better than scented soap, and rainwater than ordinary water. A little glycerine added to the soap-suds helps to make the bubbles more lasting. On a still summer day, bubble-blowing out-of-doors is a fascinating and very pretty occupation.

Shadows on the Wall

Shadowgraphy nowadays has progressed a long way from the rabbit on the wall; but in the house, ambition in this accomplishment does not often extend further than that and one or two other animals, and this is why only the rabbit, dog, and swan are given here. The swan can be made more interesting by moving the arm which forms his neck as if he were prinking and pluming, an effect which is much heightened by ruffling up and smoothing down the hair with the fingers forming his beak. To get a clear shadow it is necessary to have only one light, and that fairly close to the hands.

[Ill.u.s.tration: SHADOWS ON THE WALL]

Skeleton Leaves

Leaves which are to be skeletonized should be picked from the trees at the end of June. They should be perfect ones of full growth. It is best to have several of each kind, as some are sure to be failures.

Put the leaves in a big earthenware dish or pan, fill it with rain-water, and stand it in a warm and sunny place--the purpose of this being to soak off the green pulpy part. There is a great difference in the time which this takes: some fine leaves will be ready in a week, while others may need several months. Look at the leaves every day, and when one seems to be ready slip a piece of cardboard under it and shake it about gently in fresh cold water. If any green stuff remains, dab it with a soft brush and then put it into another basin of clean water. A fine needle can be used to take away any small and obstinate pieces of green. It is now a skeleton and must be bleached according to the following directions:--Pour into a large earthenware jar a pint of water on half a pound of chloride of lime.

Mix thoroughly, breaking up any lumps with the hand. Add two and a half quarts of water, cover over, and leave for twenty-four hours.

Then pour off the solution, leaving the sediment behind. Dissolve two pounds of soda in one quart of boiling water, and pour it, while on the boil, over the chloride solution. Cover it, and leave for forty-eight hours; then decant into bottles, being careful to leave all sediment behind.

Fill an earthenware dish with this solution, lay the leaves in it, and cover tightly. The leaves will be bleached in six to twelve hours.

They should be taken out directly they are white, as the lime makes them very brittle. After bleaching, rinse the leaves in cold water, float them on to cards, and dry between blotting-paper, under a heavy weight.

Ferns

It should be noted that if you intend to skeletonize ferns, they should not be picked before August, and they must be pressed and dried before they are put into the bleaching solution, in which they ought to stay for three or four days. The solution should be changed on the second day, and again on the fourth. After bleaching they can be treated just as the leaves are.

Wool b.a.l.l.s

Cut out two rings of cardboard, of whatever size you like, from one inch in diameter up to about four inches. A four-inch ring would make as large a ball as one usually needs, and a one-inch ring as small a one as could be conveniently made. The rim of the largest rings should not be wider than half an inch. Take a ball of wool and, placing the cardboard rings together, tie the end of it firmly round them. Then wind the wool over the rings, moving them round and round to keep it even. At first you will be able to push the ball through the rings easily, but as the wool is wound the hole will grow smaller and smaller, until you have to thread the wool through with a needle. To do this it is necessary to cut the wool into lengths, which you must be careful to join securely. Go on until the hole is completely filled and you cannot squeeze another needle through. Then slip a pair of scissors between the two rings and cut the wool all round them; and follow this up quickly by slipping a piece of string also between them and tying it tightly round the wool that is in their midst. This is to keep the loose ends, which were made directly you cut the wool with the scissors, from coming out. All that is now necessary is to pull out the cardboard rings and shape the ball a little in your hands. The tighter the wool was bound round the cards, the smaller and harder the ball will be and the more difficult will it be to cut the wool neatly and tie it. Therefore, and especially as the whole purpose of a wool ball is softness and harmlessness, it is better to wind the wool loosely and to use thick wool rather than thin.

Wool Demons

To make a "Wool Demon," take a piece of cardboard as wide as you want the demon to be tall, say three inches, and wind very evenly over it wool of the color you want the demon to be. Scarlet wool is perhaps best. Wind it about eighty times, and then remove carefully and tie a piece round about half an inch from the top to make the neck. This also secures the wool, the lower looped ends of which can now be cut.

When cut, gather up about twenty pieces each side for the arms, and, holding them firmly, bind them round with other wool, and cut off neatly at the proper length. Then tie more wool round to form the body. The legs and tail are made in the same way as the arms, except that wool is wound round the legs, beginning from the feet and working upward, only to the knees, leaving a suggestion of knickerbockers.

Eyes and other features can be sewn on in silk.

Bead-Work

Among other occupations which are not in need of careful description, but which ought to be mentioned, bead-work is important. It was once more popular than it now is; but beads in many beautiful colors are still made, and it is a pity that their advantages should be neglected. Bead-work lasts longer and is cleaner and brighter than any other form of embroidery. Perhaps the favorite use to which beads are now put is in the making of napkin-rings. Bead-flowers are made by threading beads on wire and bending them to the required shapes. Boxes of materials are sold in toy-shops.

Post-Office

"Post-Office" is a device for providing the family with a sure supply of letters. The first thing to do is to appoint a postmaster and fix upon the positions for the letter-boxes. You then write letters to each other and to any one in the house, and post them where you like; and at regular times the postmaster collects them and delivers them.

The Home Newspaper

In "The Home Newspaper," the first thing to do is to decide on which of you will edit it. As the editor usually has to copy all the contributions into the exercise-book, it is well that a good writer should be chosen. Then you want a good t.i.tle. It is better if the contributors are given each a department, because that will make the work more simple. Each number should have a story and some poetry.

Home newspapers, as a rule, come out once a month. Once a week is too often to keep up. There is a good description of one in a book by E.

Nesbit, called _The Treasure-Seekers_.

Paper and Cardboard Toys--A c.o.c.ked Hat

[Ill.u.s.tration: FIG. 1]

To make a c.o.c.ked hat, take a sheet of stiff paper and double it. Then fold over each of the doubled corners until they meet in the middle.

The paper will then resemble Fig. 1. Then fold AB AB over the doubled corners; fold the corresponding strip of paper at the back to balance it, and the c.o.c.ked hat is ready to be worn. If it is to be used in charades, it is well to pin it here and there to make it secure.

Paper Boats

[Ill.u.s.tration: FIG. 2]

If the c.o.c.ked hat is held in the middle of each side and pulled out into a square, and the two sides are then bent back to make another c.o.c.ked hat (but of course much smaller); and then, if this c.o.c.ked hat is also pulled out into a square, it will look like Fig. 2. If the sides A and A are held between the finger and thumb and pulled out, a paper boat will be the result, as in Fig. 3.

[Ill.u.s.tration: FIG 3.]

Paper Darts

[Ill.u.s.tration: PAPER DARTS]

Take a sheet of stiffish paper about the size of this page and fold it longways, exactly double. Then fold the corners of one end back to the main fold, one each side. The paper sideways will then look as in Fig.

1. Then double these folded points, one each side, back to the main fold. The paper will then look as in Fig. 2. Repeat this process once more. The paper will then look as in Fig. 3. Compress the folds very tightly, and open out the top ones, so that in looking down on the dart it will have the appearance of Fig. 4. The dart is then ready for use.