Home

Tom Swift and His Giant Cannon Part 15

Tom Swift and His Giant Cannon - novelonlinefull.com

You’re read light novel Tom Swift and His Giant Cannon Part 15 online at NovelOnlineFull.com. Please use the follow button to get notification about the latest chapter next time when you visit NovelOnlineFull.com. Use F11 button to read novel in full-screen(PC only). Drop by anytime you want to read free – fast – latest novel. It’s great if you could leave a comment, share your opinion about the new chapters, new novel with others on the internet. We’ll do our best to bring you the finest, latest novel everyday. Enjoy

"I can as soon as I get my giant cannon, perhaps," admitted the young inventor. "I think I have solved the problem of the explosive. Now to work on the cannon."

An examination of the gauges, which, being attached to the cannon and plate by electric wires, were not damaged when the blast came, showed that Tom's wildest hopes had been confirmed. He had the most powerful explosive ever made--or at least as far as he had any knowledge, and he had had samples of all the best makes.

Concerning Tom's powder, or explosive, I will only say that he kept the formula of it secret from all save his father. All that he would admit, when the government experts asked him about it, later, was that the base was not nitro-glycerine, but that this entered into it. He agreed, however, in case his gun was accepted by the government, to disclose the secret to the ordnance officers.

But Tom's work was only half done. It was one thing to have a powerful explosive, but there must be some means of utilizing it safely--some cannon in which it could be fired to send a projectile farther than any cannon had ever sent one. And to do this much work was necessary.

Tom figured and planned, far into the night, for many weeks after that.

He had to begin all over again, working from the basis of the power of his new explosive. And he had many new problems to figure out.

But finally he had constructed--on paper--a gun that was to his liking.

The most exhaustive figuring proved that it had a margin of safety that would obviate all danger of its bursting, even with an accidental over-charge.

"And the next thing is to get the gun cast," said Tom to Ned one day.

"Are you going to do it in your shops?" his chum asked.

"No; it would be out of the question for me. I haven't the facilities.

I'm going to give the contract to the Universal Steel Company. We'll pay them a visit in a day or two."

But even the great facilities of the steel corporation proved almost inadequate for Tom's giant cannon. When he showed the drawings, on which he had already secured a patent, the manager balked.

"We can't cast that gun here!" he said.

"Oh, yes, you can!" declared Tom, who had inspected the plant. "I'll show you how."

"Why, we haven't a mould big enough for the central core," was another objection.

"Then we'll make one," declared Tom "We'll dig a pit in the earth, and after it is properly lined we can make the cast there."

"I never thought of that!" exclaimed the manager. "Perhaps it can be done."

"Of course it can!" cried Tom. "Do you think you can shrink on the jackets, and rifle the central tube?"

"Oh, yes, we can do that. The initial cast was what stumped me. But we'll go ahead now."

"And you can wind the breech with wire, and braze it on; can't you?"

persisted Tom.

"Yes, I think so. Are you going to have a wire-wound gun?"

"That, in combination with a steel-jacketed one. I'm going to take no chances with 'Swift.i.te'!" laughed Tom, for so he had named his new explosive, in honor of his father, who had helped him with the formula.

"It must be mighty powerful," exclaimed the manager.

"It is," said Tom, simply.

I am not going to tire my readers with the details leading up to the casting of Tom's big cannon. Sufficient to say that the general plan, in brief, was this: A hole would be dug in the earth, in the center of the largest casting shop--a hole as deep as the gun was to be long.

This was about one hundred feet, though the gun, when finished, would be somewhat shorter than this. An allowance was to be made for cutting.

In the center of this hole would be a small "core" made of asbestos and concrete mixed. Around this would be poured the molten steel from great caldrons. It would flow into the hole. The sides of earth--lined with fire-clay--would hold it in, and the middle core would make a hole throughout the length of the central part of the gun. Afterward this hole would be bored and rifled to the proper calibre.

After this central part was done, steel jackets or sleeves would be put on, red-hot, and allowed to shrink. Then would come a winding of wire, to further strengthen the tube, and then more sleeves or jackets. In this way the gun would be made very strong.

As the greatest pressure would come at the breech, or in the powder chamber there, the gun would be thickest at this point, decreasing in size to the muzzle.

It took many weary weeks to get ready for the first cast, but finally Tom received word that it was to be made, and with Ned, and Mr. Damon, he proceeded to the plant of the steel concern.

There was some delay, but finally the manager gave the word. Tom and his friends, standing on a high gallery, watched the tapping of the combined furnaces that were to let the molten steel into the caldrons.

There were several of these, and their melted contents were to be poured into the mould at the same time.

Out gushed the liquid steel, giving off a myriad of sparks. The workers, as well as the visitors, had to wear violet-tinted gla.s.ses to protect their eyes from the glare.

"Hoist away!" cried the manager, and the electric cranes started off with the caldrons of liquid fire, weighing many tons.

"Pour!" came the command, and into the pit in the earth splashed the melted steel that was to form the big cannon. From each caldron there issued a stream of liquid metal of intense heat. There were numerous explosions as the air bubbles burst--explosions almost like a battery in action.

"So far so good!" exclaimed the manager, with a sigh of relief as the last of the melted stuff ran into the mould. "Now, when it cools, which won't be for some days, we'll see what we have."

"I hope it contains no flaws," spoke Tom, "That is the worst of big guns--you never can tell when a flaw will develop. But I hope--"

Tom was interrupted by the sound of a dispute at one of the outer doors of the shop.

"But I tell you I must go in--I belong here in!" a voice cried. It had a German accent, and at the sound of it Tom and Ned looked at each other.

"Who is there?" asked the manager sharply of the foreman..

"Oh, a crazy German. He belongs in one of the other shops, and I guess he's mixed up. He thinks he belongs here. I sent him about his business."

"That is right," remarked the manager. "I gave orders, at your request," he said to Tom, "that no one but the men in this part of the plant were to be present at the casting. I can't understand what that fellow wanted."

"I think I can," murmured Tom, to himself.

CHAPTER XIV

A NIGHT INTRUDER

"Tom, aren't you going to try to get a look at that German?" whispered Ned, as he and his chum came down from the elevated gallery at the conclusion of the cast. "I mean the one who tried to get in!"

"I'd like to, Ned, but I don't want to arouse any suspicion," replied Tom. "I've got to stay here a while yet, and arrange about shrinking on the jackets, after the core is rifled. I don't see how--"

"I'll slip out and see if I can get a peep at him," went on Ned. "If it's like the one Koku described, we'll know that he's still after you."

"All right, Ned. Do as you like, only be cautious."

Please click Like and leave more comments to support and keep us alive.

RECENTLY UPDATED MANGA

I'll Be the Male Leads Sister-in-Law

I'll Be the Male Leads Sister-in-Law

I'll Be the Male Leads Sister-in-Law Chapter 548 Author(s) : September Flowing Fire, 九月流火 View : 165,236
Star Odyssey

Star Odyssey

Star Odyssey Chapter 3272: Attempt Author(s) : Along With The Wind, 随散飘风 View : 2,234,318
Demon Sword Maiden

Demon Sword Maiden

Demon Sword Maiden Volume 12 - Yomi-no-kuni: Chapter 97 – Sword Heavenly Path Author(s) : Luo Jiang Shen, 罗将神, 罗酱, Carrot Sauce View : 419,806

Tom Swift and His Giant Cannon Part 15 summary

You're reading Tom Swift and His Giant Cannon. This manga has been translated by Updating. Author(s): Victor Appleton. Already has 591 views.

It's great if you read and follow any novel on our website. We promise you that we'll bring you the latest, hottest novel everyday and FREE.

NovelOnlineFull.com is a most smartest website for reading manga online, it can automatic resize images to fit your pc screen, even on your mobile. Experience now by using your smartphone and access to NovelOnlineFull.com