The Practice and Science of Drawing Part 6

It is useful if one can establish a unit of measurement, some conspicuous distance that does not vary in the object (if a living model a great many distances will be constantly varying), and with which all distances can be compared.

In setting out a drawing, this fixing of certain salient points is the first thing for the student to do. The drawing reproduced on page 90 [Transcribers Note: Plate XVIII] has been made to ill.u.s.trate the method of procedure it is advisable to adopt in training the eye to accurate observation. It was felt that a vertical line drawn through the pit of the arm would be the most useful for taking measurements on, and this was first drawn and its length decided upon. Train yourself to draw between limits decided upon at the start. This power will be of great use to you when you wish to place a figure in an exact position in a picture. The next thing to do is to get the relative heights of different points marked upon this line. The fold at the pit of the stomach was found to be exactly in the centre. This was a useful start, and it is generally advisable to note where the half comes first, and very useful if it comes in some obvious place. Other measurements were taken in the same way as our points A B C D E in the diagram on page 87 [Transcribers Note: Diagram IV], and horizontal lines drawn across, and the transverse distances measured in relation to the heights. I have left these lines on the drawing, and also different parts of it unfinished, so as to show the different stages of the work. These guide lines are done mentally later on, when the student is more advanced, and with more accuracy than the clumsy knitting-needle. But before the habit of having constantly in mind a vertical and horizontal line with which to compare positions is acquired, they should be put in with as much accuracy as measuring can give.

[Sidenote: Blocking in your Drawing.]

The next thing to do is to block out the s.p.a.ces corresponding to those occupied by the model in the field of your vision. The method employed to do this is somewhat similar to that adopted by a surveyor in drawing the plan of a field. a.s.suming he had an irregular shaped one, such as is drawn in Fig. X, page 87 [Transcribers Note: Diagram IV], he would proceed to invest it with straight lines, taking advantage of any straightness in the boundary, noting the length and the angles at which these straight lines cut each other, and then reproducing them to scale on his plan. Once having got this scaffolding accurately placed, he can draw the irregularities of the shape in relation to these lines with some certainty of getting them right.

You should proceed in very much the same way to block out the s.p.a.ces that the forms of your drawing are to occupy. I have produced these blocking-out lines beyond what was necessary in the accompanying drawing (page 87 [Transcribers Note: Diagram IV]), in order to show them more clearly.

[Sidenote: How to observe the Shape of Curves.]

There is yet another method of construction useful in noting accurately the shape of a curved line, which is ill.u.s.trated in Fig. Y, page 87 [Transcribers Note: Diagram IV]. First of all, fix the positions of the extremities of the line by means of the vertical and horizontal. And also, as this is a double curve, the point at which the curvature changes from one direction to the other: point C. By drawing lines CA, CB and noting the distances your curves travel from these straight lines, and particularly the relative position of the farthest points reached, their curvature can be accurately observed and copied. In noting the varying curvature of forms, this construction should always be in your mind to enable you to observe them accurately. First note the points at which the curvature begins and ends, and then the distances it travels from a line joining these two points, holding up a pencil or knitting-needle against the model if need be.

[Ill.u.s.tration: Plate XVIII.

STUDY ILl.u.s.tRATING METHOD OF DRAWING

Note the different stages. 1st. Centre line and transverse lines for settling position of salient points. 2nd. Blocking in, as shown in further leg. 3rd. Drawing in the forms and shading, as shown in front leg. 4th. Rubbing with fingers (giving a faint middle tone over the whole), and picking out high lights with bread, as shown on back and arms.]

[Sidenote: The Drawing proper.]

A drawing being blocked out in such a state as the further leg and foot of our demonstration drawing (page 90 [Transcribers Note: Plate XVIII]), it is time to begin the drawing proper. So far you have only been pegging out the ground it is going to occupy. This initial scaffolding, so necessary to train the eye, should be done as accurately as possible, but don't let it interfere with your freedom in expressing the forms afterwards. The work up to this point has been mechanical, but it is time to consider the subject with some feeling for form. Here knowledge of the structure of bones and muscles that underlie the skin will help you to seize on those things that are significant and express the form of the figure. And the student cannot do better than study the excellent book by Sir Alfred D. Fripp on this subject, ent.i.tled Human Anatomy for Art Students. Notice particularly the swing of the action, such things as the pull occasioned by the arm resting on the farther thigh, and the prominence given to the forms by the straining of the skin at the shoulder. Also the firm lines of the bent back and the crumpled forms of the front of the body. Notice the overlapping of the contours, and where they are accentuated and where more lost, &c., drawing with as much feeling and conviction as you are capable of. You will have for some time to work tentatively, feeling for the true shapes that you do not yet rightly see, but as soon as you feel any confidence, remember it should be your aim to express yourself freely and swiftly.

There is a tendency in some quarters to discourage this blocking in of the forms in straight lines, and certainly it has been harmful to the freedom of expression in the work of some students. They not only begin the drawing with this mechanical blocking in, but continue it in the same mechanical fashion, cutting up almost all their curves into flatnesses, and never once breaking free from this scaffolding to indulge in the enjoyment of free line expression. This, of course, is bad, and yet the character of a curved line is hardly to be accurately studied in any other way than by observing its relation to straight lines. The inclination and length of straight lines can be observed with certainty. But a curve has not this definiteness, and is a very unstable thing to set about copying unaided. Who but the highly skilled draughtsman could attempt to copy our random shape at Fig. X, page 87 [Transcribers Note: Diagram IV], without any guiding straight lines? And even the highly skilled draughtsman would draw such straight lines mentally. So that some blocking out of the curved forms, either done practically or in imagination, must be adopted to rightly observe any shapes. But do not forget that this is only a scaffolding, and should always be regarded as such and kicked away as soon as real form expression with any feeling begins.

But it will be some years before the beginner has got his eye trained to such accuracy of observation that he can dispense with it.

[Sidenote: In Blocking-in observe Shape of the Background as much as the Object.]

In the case of foreshortenings, the eye, unaided by this blocking out, is always apt to be led astray. And here the observation of the shape of the background against the object will be of great a.s.sistance. The appearance of the foreshortened object is so unlike what you know it to be as a solid thing, that much as it is as well to concentrate the attention on the background rather than on the form in this blocking-out process. And in fact, in blocking out any object, whether foreshortened or not, the shape of the background should be observed as carefully as any other shape. But in making the drawing proper, the forms must be observed in their inner relations. That is to say, the lines bounding one side of a form must be observed in relation to the lines bounding the other side; as the true expression of form, which is the object of drawing, depends on the true relationship of these boundaries. The drawing of the two sides should be carried on simultaneously, so that one may constantly compare them.

[Sidenote: Boundaries a series of Overlappings.]

The boundaries of forms with any complexity, such as the human figure, are not continuous lines. One form overlaps another, like the lines of a range of hills. And this overlapping should be sought for and carefully expressed, the outlines being made up of a series of overlappings.

[Sidenote: Shading.]

In Line Drawing shading should only be used to aid the expression of form. It is not advisable to aim at representing the true tone values.

In direct light it will be observed that a solid object has some portion of its surface in light, while other portions, those turned away from the light, are in shadow. Shadows are also cast on the ground and surrounding objects, called cast shadows. The parts of an object reflecting the most direct light are called the high lights. If the object have a shiny surface these lights are clear and distinct; if a dull surface, soft and diffused. In the case of a very shiny surface, such as a glazed pot, the light may be reflected so completely that a picture of the source of light, usually a window, will be seen.

In the diagram on page 95 [Transcribers Note: Diagram V], let A represent the plan of a cone, B C the opening of a window, and D the eye of the spectator, and E F G the wall of a room. Light travels in straight lines from the window, strikes the surface of the cone, and is reflected to the eye, making the angle of incidence equal to the angle of reflection, the angle of incidence being that made by the light striking an object, and the angle of reflection that made by the light in leaving the surface.

It will be seen that the lines B1D, C2D are the limits of the direct rays of light that come to the eye from the cone, and that therefore between points 1 and 2 will be seen the highest light. If the cone have a perfect reflecting surface, such as a looking-gla.s.s has, this would be all the direct light that would be reflected from the cone to the eye.

But a.s.suming it to have what is called a dull surface, light would be reflected from other parts also, although not in so great a quant.i.ty. If what is called a dull surface is looked at under a microscope it will be found to be quite rough, _i.e._ made up of many facets which catch light at different angles.

[Ill.u.s.tration: Diagram V.

PLAN OF CONE A, LIT BY WINDOW BC; POSITION OF EYE D. ILl.u.s.tRATING PRINCIPLES OF LIGHT AND SHADE]

Lines B4, C3 represent the extreme limits of light that can be received by the cone, and therefore at points 3 and 4 the shadow will commence.

The fact that light is reflected to the eye right up to the point 3 does not upset the theory that it can only be reflected from points where the angle of incidence can equal the angle of reflection, as it would seem to do, because the surface being rough presents facets at different angles, from some of which it can be reflected to the eye right up to point 3. The number of these facets that can so reflect is naturally greatest near the high lights, and gets gradually less as the surface turns more away; until the point is reached where the shadows begin, at which point the surface positively turns away from the light and the reflection of direct light ceases altogether. After point 3 there would be no light coming to the eye from the object, were it not that it receives reflected light. Now, the greatest amount of reflected light will come from the direction opposite to that of the direct light, as all objects in this direction are strongly lit. The surface of the wall between points E and H, being directly opposite the light, will give most reflection. And between points 5 and 6 this light will be reflected by the cone to the eye in its greatest intensity, since at these points the angles of incidence equal the angles of reflection. The other parts of the shadow will receive a certain amount of reflected light, lessening in amount on either side of these points. We have now rays of light coming to the eye from the cone between the extreme points 7 and 8. From 7 to 3 we have the light, including the half tones. Between 1 and 2 the high light. Between 3 and 8 the shadows, with the greatest amount of reflected light between 5 and 6.

[Ill.u.s.tration: Plate XIX.

ILl.u.s.tRATING CURVED LINKS SUGGESTING FULLNESS AND FORESHORTENING]

I should not have troubled the reader with this tedious diagram were it not that certain facts about light and shade can be learned from it. The first is that the high lights come much more within the edge of the object than you would have expected. With the light directly opposite point 7, one might have thought the highest light would have come there, and that is where many students put it, until the loss of roundness in the appearance of their work makes them look more carefully for its position. So remember always to look out for high lights within the contours of forms, not on the edges.

The next thing to notice is that #the darkest part of the shadow will come nearest the lights between points 3 and 5#. This is the part turned most away from the direction of the greatest amount of reflected light, and therefore receiving least. The lightest part of the shadow will be in the middle, rather towards the side away from the light, generally speaking. The shadow cast on the ground will be dark, like the darkest part of the shadow on the cone, as its surface is also turned away from the chief source of reflected light.

Although the artist will very seldom be called upon to draw a cone, the same principles of light and shade that are so clearly seen in such a simple figure obtain throughout the whole of nature. This is why the much abused drawing and shading from whitened blocks and pots is so useful. Nothing so clearly impresses the general laws of light and shade as this so-called dull study.

This lightening of shadows in the middle by reflected light and darkening towards their edges is a very important thing to remember, the heavy, smoky look students' early work is so p.r.o.ne to, being almost entirely due to their neglect through ignorance of this principle.

Nothing is more awful than shadows darker in the middle and gradually lighter towards their edges. Of course, where there is a deep hollow in the shadow parts, as at the armpit and the fold at the navel in the drawing on page 90 [Transcribers Note: Plate XVIII], you will get a darker tone. But this does not contradict the principle that generally shadows are lighter in the middle and darker towards the edges. Note the luminous quality the observation of this principle gives the shadow on the body of our demonstration drawing.

This is a crude statement of the general principles of light and shade on a simple round object. In one with complex surfaces the varieties of light and shade are infinite. But the same principles hold good. The surfaces turned more to the source of light receive the greatest amount, and are the lightest. And from these parts the amount of light lessens through what are called the half tones as the surface turns more away, until a point is reached where no more direct light is received, and the shadows begin. And in the shadows the same law applies: those surfaces turned most towards the source of reflected light will receive the most, and the amount received will gradually lessen as the surface turns away, until at the point immediately before where the half tones begin the amount of reflected light will be very little, and in consequence the darkest part of the shadows may be looked for. There may, of course, be other sources of direct light on the shadow side that will entirely alter and complicate the effect. Or one may draw in a wide, diffused light, such as is found in the open air on a grey day; in which case there will be little or no shadow, the modelling depending entirely on degrees of light and half tone.

In studying the principles of simple light and shade it is advisable to draw from objects of one local colour, such as white casts. In parti-coloured objects the problem is complicated by the different tones of the local colour. In line drawing it is as well to take as little notice as possible of these variations which disturb the contemplation of pure form and do not belong to the particular province of form expression with which drawing is concerned.

Although one has selected a strong half light and half shade effect to ill.u.s.trate the general principles of light and shade, it is not advisable in making line drawings to select such a position. A point of view with a fairly wide light at your back is the best. In this position little shadow will be seen, most of the forms being expressed by the play of light and half tone. The contours, as they are turned away from the light, will naturally be darker, and against a light background your subject has an appearance with dark edges that is easily expressed by a line drawing. Strong light and shade effects should be left for ma.s.s drawing. You seldom see any shadows in Holbein's drawings; he seems to have put his sitters near a wide window, close against which he worked.

Select also a background as near the tone of the highest light on the object to be drawn as possible. This will show up clearly the contour.

In the case of a portrait drawing, a newspaper hung behind the head answers very well and is always easily obtained. The tone of it can be varied by the distance at which it is placed from the head, and by the angle at which it is turned away from or towards the light.

Don't burden a line drawing with heavy half tones and shadows; keep them light. The beauty that is the particular province of line drawing is the beauty of contours, and this is marred by heavy light and shade. Great draughtsmen use only just enough to express the form, but never to attempt the expression of tone. Think of the half tones as part of the lights and not as part of the shadows.

There are many different methods of drawing in line, and a student of any originality will find one that suits his temperament. But I will try and ill.u.s.trate one that is at any rate logical, and that may serve as a fair type of line drawing generally.

The appearance of an object is first considered as a series of contours, some forming the boundaries of the form against the background, and others the boundaries of the subordinate forms within these bounding lines. The light and shade and differences of local colour (like the lips, eyebrows, and eyes in a head) are considered together as tones of varying degrees of lightness and darkness, and suggested by means of lines drawn parallel across the drawing from left to right, and from below upwards, or vice versa, darker and closer together when depth is wanted, and fainter and further apart where delicacy is demanded, and varying in thickness when gradation is needed. This rule of parallel shading is broken only when strongly marked forms, such as the swing lines of hair, a prominent bone or straining muscles, &c., demand it.

This parallel shading gives a great beauty of surface and fleshiness to a drawing. The lines following, as it were, the direction of the light across the object rather than the form, give a unity that has a great charm. It is more suited to drawings where extreme delicacy of form is desired, and is usually used in silver point work, a medium capable of the utmost refinement.

[Ill.u.s.tration: Plate XX.

STUDY FOR THE FIGURE OF LOVE IN THE PICTURE "LOVE LEAVING PSYCHE"

ILl.u.s.tRATING A METHOD OF DRAWING

The lines of shading following a convenient parallel direction unless prominent forms demand otherwise.]

In this method the lines of shading not being much varied in direction or curved at all, a minimum amount of that "form stimulus" is conveyed.

The curving of the lines in shading adds considerably to the force of the relief, and suggests much stronger modelling. In the case of foreshortened effects, where the forms are seen at their fullest, arching one over the other, some curvature in the lines of shading is of considerable advantage in adding to the foreshortened look.

Lines drawn down the forms give an appearance of great strength and toughness, a tense look. And this quality is very useful in suggesting such things as joints and sinews, rocks, hard ground, or gnarled tree-trunks, &c. In figure drawing it is an interesting quality to use sparingly, with the shading done on the across-the-form principle; and to suggest a difference of texture or a straining of the form. Lines of shading drawn in every direction, crossing each other and resolving themselves into tone effects, suggest atmosphere and the absence of surface form. This is more often used in the backgrounds of pen and ink work and is seldom necessary in pencil or chalk drawing, as they are more concerned with form than atmosphere. Pen and ink is more often used for elaborate pictorial effects in ill.u.s.tration work, owing to the ease with which it can be reproduced and printed; and it is here that one more often finds this muddled quality of line spots being used to fill up interstices and make the tone even.

Speaking generally, #lines of shading drawn across the forms suggest softness, lines drawn in curves fulness of form, lines drawn down the forms hardness, and lines crossing in all directions so that only a mystery of tone results, atmosphere#. And if these four qualities of line be used judiciously, a great deal of expressive power is added to your shading. And, as will be explained in the next chapter, somewhat the same principle applies to the direction of the swing of the brush in painting.

Shading lines should never be drawn backwards and forwards from left to right (scribbled), except possibly where a mystery of shadow is wanted and the lines are being crossed in every direction; but never when lines are being used to express form. They are not sufficiently under control, and also the little extra thickness that occurs at the turn is a nuisance.

The crossing of lines in shading gives a more opaque look. This is useful to suggest the opaque appearance of the darker pa.s.sage that occurs in that part of a shadow nearest the lights; and it is sometimes used in the half tones also.