Textiles Part 12

1. Humidifier.

2. Twister machine.

3. Boxes containing spools of cotton, ready to be put in creel and form warp.]

From the bleaching and dyeing departments the skeins of thread go back to the mill to be wound on the bobbins, and from the bobbins finally on the small wooden spools. The automatic winding machines can be regulated to wind any given number of yards. The small spools are fastened on pivots, the thread from the bobbins fastened on the spools, and the machines set in motion. At the required number of yards the spools stop revolving. The ordinary spool of cotton thread contains 200 yards, and when this has been wound on, the thread is cut with a knife by an attendant, who also cuts the little nick in the rim of the spool and fastens therein the end of the thread. Thread mills commonly print their own labels, and these are affixed to the spools by special machinery with remarkable rapidity. From the labeling machine the spools go to an inspector, who examines each one for imperfections, and any that are found faulty are discarded. When packed in pasteboard boxes or in cabinets the thread is ready for market.

=Thread Numbers.= Spool cotton for ordinary use is made in sizes ranging from No. 8 coa.r.s.e to No. 200 fine. In cotton yarn numbering, the fineness of the spun strand is denoted by the number of hanks, each containing 840 yards, which are required to weigh one pound, as ill.u.s.trated in the following table:

When 1 hank of cotton yarn ( 840 yds.) weigh 1 lb. it is No. 1 " 10 " " " " ( 8,400 yds.) " " " " 10 " 16 " " " " (13,440 yds.) " " " " 16 " 30 " " " " (25,200 yds.) " " " " 30 " 50 " " " " (42,000 yds.) " " " " 50 " 100 " " " " (84,000 yds.) " " " " 100

The early manufactured thread was three cord, and took its number from the size of the yarn from which it was made. No. 60 yarn made No. 60 thread, though in point of fact the actual caliber of No. 60 thread would equal No. 20 yarn, being three No. 60 strands combined together. When the sewing machine came into the market as the great consumer of thread, spool cotton had to be made a smoother and more even product than had previously been necessary for hand needles. This was accomplished by using six strands instead of three, the yarns being twice as fine. As thread numbers were already established, they were not altered for the new article, and consequently at the present time No. 60 six-cord, for example, and No. 60 three-cord are identical in size, though in reality No. 60 six-cord is formed of No. 120 yarns.

It is relatively smoother, more even, and stronger than the three-cord grade. All sizes of six-cord threads are made of six strands, each of the latter being twice as fine as the number of the thread as designated by the label. Three-cord spool cotton is made of three strands of yarn, each of the same number as the thread.

=Sizing.= In textile manufacturing, sizing is the process of strengthening warp yarns by coating them with a preparation of starch, flour, etc., in order that they may withstand the weaving process without chafing or breaking. The operation of sizing is also often resorted to in finishing certain cla.s.ses of cotton and linen fabrics, which are sized or dressed with various mixtures in order to create an appearance of weight and strength where these qualities do not exist, or, if present, only in a small degree. The object in sizing warp yarn before weaving is to enable that process to be performed with the minimum of threads breaking. Judicious sizing adds to the strength of the yarn by filling up the s.p.a.ces between the fibers, and by binding the loose ends on the outside of the thread to the main part. In order to accomplish this a number of ingredients are used in the size preparation, as no single material used alone gives satisfactory results. The filling up of the minute s.p.a.ces in the yarns and the adhesion of the fibers produce a smooth thread with sufficient hardness to resist the continual chafing of the shuttles, reeds, and harnesses during the process of weaving. Flour and starch in a liquid state are used for this purpose, but owing to the liability to mildew, flour is not so much used as starch. Both of these materials, however, make the yarn brittle, and other ingredients are combined with them to overcome the brittleness. For a softener on heavy weight goods nothing has been found superior to good beef tallow. On light-weight goods the softener giving the most general satisfaction is paraffin.

When properly made the size preparation is a smooth ma.s.s of uniform consistence, free from lumps of any kind, and from all sediment and odor. Starch--the princ.i.p.al material which gives body to any size--requires the most careful treatment. It is first mixed with cold water into a smooth, creamy milk, which is slowly poured into the necessary quant.i.ty of boiling water until a clear, uniform paste is formed. Then the softeners are added, such as soaps, oils, and animal fats; next a small amount of gelatine or glue is stirred in and some form of preservative, usually chloride of zinc or salicylic acid. The ma.s.s is then thoroughly stirred in tilted jacketed kettles with mechanical stirrers. The size may be applied to the yarn either hot or cold. When applied hot it penetrates into the interior, filling up every s.p.a.ce between the fibers, binding all together, and forming a hard coating on the surface of the thread. A thorough washing or steaming serves to remove all the size from the woven fabric.

[Ill.u.s.tration: FINISHING ROOM]

=Cotton Finishing.= Cotton fabrics, like other textiles, after leaving the loom must be subjected to various finishing processes so as to bring them into commercial condition. On piece-dyed goods part of the finishing is done before and part after the dyeing process. Each cla.s.s of fabrics has definite finishing processes. In some cases weighting materials are added to the fabric so as to hide more or less its actual construction. Cotton fabrics just from the loom present a soft and open structure, more so than other textiles. Therefore it is necessary to use proper finishing materials and processes which will fill up the openings or interstices as produced in the fabric by the interlacing of warp and filling, and at the same time give to the fabric a certain amount of stiffness. Of course this finish will disappear during wear or washing, it having been imparted to the fabric to bring the latter into a salable condition.

Cotton fabrics after weaving may be subjected to the following sub-processes of finishing:

Inspecting, Burling and Tr.i.m.m.i.n.g, Bleaching, Washing, Scutching, Drying.

After the cloth leaves the loom it is brushed; then it pa.s.ses over to the inspection table in an upward receding direction, so that the eye of the operator can readily detect imperfections. The ends of two or more pieces as coming from the loom are sewed into a string for convenient handling in the bleaching.

=Bleaching.= The object of bleaching is to free the cotton from its natural color. The ancient method of bleaching by exposure to the action of the sun's rays and frequent wetting has been superseded by a more complicated process involving the use of various chemicals.

Pieces of cloth are tacked together (sewed) to form one continuous piece of from three to one thousand yards in length. The cloth is next pa.s.sed over hot cylinders or a row of small gas jets to remove all the fine, loose down from the surface. The goods are then washed and allowed to remain in a wet condition for a few hours, after which they are pa.s.sed through milk of lime under heavy pressure, followed by rinsing in clear water. The goods are next "scoured" in water acidulated with hydrochloric acid, and boiled in a solution of soda, then washed as before in clear water. Next they are chlorined by being laid in a stone cistern containing a solution of chloride of lime and allowed to remain a few hours. This operation requires great care in the preparation of the chloride of lime, for if the smallest particle of undissolved bleaching powder is allowed to come in contact with and remain upon the cloth it is liable to produce holes. The goods are then boiled for four or five hours in a solution of carbonate of soda, after which they are washed. They are again chlorined as before and washed. The long strips are finally scoured in hydrochloric acid, washed, and well squeezed between metal rollers covered with cloth.

After squeezing and drying, the cloth, if required for printing, needs no further operation, but if intended to be marketed in a white state, it must be finished, that is, starched or calendered.

=Starching.= The starch is applied to the cloth by means of rollers which dip into a vat containing the solution, while other rollers remove the excess. Sometimes the cloth is artificially weighted with fine clay or gypsum, the object being to render the cloth solid in appearance.

=Calendering.= The cloth is now put through the calendering machine, the object of which is to give a perfectly smooth and even surface, and sometimes a superficial glaze; the common domestic smoothing iron may be regarded as a form of a calendering utensil. The cloth is first pa.s.sed between the cylinders of a machine two, three, or four times, according to the finish desired. The calender finishes may be cla.s.sed as dull, l.u.s.ter, glazed, watered or moire, and embossed. The calender always flattens and imparts a l.u.s.ter to the cloth pa.s.sed through it.

With considerable pressure between smooth rollers a soft, silky l.u.s.ter is given by equal flattening of all the threads. By pa.s.sing two folds of the cloth at the same time between the rollers the threads of one make an impression upon the other, and give a wiry appearance. The iron rollers are sometimes made hollow for the purpose of admitting steam or gas in order to give a glaze finish. Embossing is produced by pa.s.sing the cloth under heated metal rollers upon which are engraved suitable patterns, the effect of which is the reproduction of the pattern upon the surface of the cloth.

=Mercerizing.= This is a process of treating cotton yarn or fabrics with caustic soda and sulphuric acid whereby they are made stronger and heavier, and given a silky l.u.s.ter and feel. The l.u.s.ter produced upon cotton is due to two causes, the change in the structure of the fiber, and the removing of the outer skin of the fiber. The swelling of the fiber makes it rounder, so that the rays of light as they fall upon the surface are reflected instead of being absorbed. The quality and degree of l.u.s.ter of mercerized cotton fabrics depends largely upon the grade of cotton used. The long-staple Egyptian and Sea Island cotton, so twisted as to leave the fibers as nearly loose and parallel as possible, show the best results. If the yarn is singed the result is a further improvement. Yarns and fabrics constructed of the ordinary grades of cotton cannot be mercerized to advantage. The cost of producing high-grade mercerized yarn is about three times that of an unmercerized yarn of the same count, spun from the commoner qualities of cotton.

Mercerized yarn is employed in almost every conceivable manner, not only in the manufacture of half-silk and half-wool fabrics, and in l.u.s.trous all-cotton tissues, but also in the production of figures and stripes of cotton goods having non-l.u.s.trous grounds. Mercerized yarn used in connection with silk is difficult to detect except by an expert eye.

=Characteristics of a good piece of Cotton Cloth.= A perfect cotton fiber has little convolutions in it which give the strong twist and spring to a good thread. In this respect the Sea Island cotton is the best. There are five things requisite for cotton cloth to be good, viz.:

1. The cloth must be made of good fiber, that is ripe and long.

2. The fiber must be carefully prepared. All the processes must be well performed--for the very fine thread fiber must be combed to remove poor fiber. The combing, however, is not always done.

3. The warp and woof threads must be in good proportion.

4. The cloth must be soft, so that it will not crease easily.

5. It must be carefully bleached--the chemicals used must not be strong.

CHAPTER XII

KNITTING

The art and process of forming fabrics by looping a single thread, either by hand with slender wires or by means of a machine provided with hooked needles, is called knitting. Crocheting is an a.n.a.logous art, but differs from knitting in the fact that the separate loops are thrown off and finished by hand successively, whereas in knitting the whole series of loops which go to form one length or round are retained on one or more needles, while a new series is being formed on a separate needle. Netting is performed by knotting threads into meshes that cannot be unraveled, while knitting can be unraveled and the same thread applied to any other use. Knitting is really carried on without making knots; thus, the destruction of one loop threatens the destruction of the whole web, unless the meshes are reunited.

The principle of knitting is quite distinct from that of weaving. In the weaving of cloth the yarns of one system cross those of another system at right angles, thus producing a solid, firm texture. The great elasticity of any kind of texture produced by knitting is the chief feature that distinguishes hosiery from woven stuffs. The nature of the loop formed by the knitting needle favors elongation and contraction without marring in the least the general structure of the goods. Builders of weavers' looms have at times endeavored to secure this elastic effect by certain manipulations of the mechanism of the loom, but as yet nothing approaching the product of the knitter has been made. The elastic feature of a knitted texture renders it peculiarly adapted for all cla.s.ses and kinds of undergarments, for it not only fits the body snugly, but expands more readily than any other fabric of similar weight.

=Knitting Machines.= There are various machines for knitting. The circular knitting machine produces a circular web of various degrees of fineness, and in sizes ranging from a child's stocking to a man's No. 50 undershirt. The circular fabric made in this manner has to be cut up and joined together by some method to make a complete garment.

The knitting frame for producing fashioned goods makes a flat strip, narrowing and widening it at certain places so as to conform to the shape of the foot, leg, or body. These strips then have to be joined by sewing or knitting to form a garment. Fashioning machines are indispensable for knitting the Niantic and French foot, and also for the production of stripes, fancy openwork, and lace hosiery.

[Ill.u.s.tration: KNITTING MACHINE FOR HOSIERY]

All plain machines of any cla.s.s produce only plain knitted fabrics, while ribbed machines make only ribbed fabrics. Still, many garments in their make-up include both kinds of knitting; therefore, many machines produce only certain parts of particular garments. In the case of half-hose there is frequently a ribbed top, or in underwear a ribbed cuff, and these may be made either of circular web or full fashioned. In each case the ribbed portion is first knit and then transferred to a plain machine, and being placed upon the needles is worked on to the rest of the garment. In some instances the heel is made by the machine working the leg, though there are numerous knitters specially designed for turning out only this particular part.

Among other knitting machines in modern use are the drawers machine; machines for hose and half-hose with apparatus for making the instep, finishing off the toe, splicing or thickening the heels, etc.; machines for producing the bottoms or soles of hose separately, and also the instep separately; circular stocking machines for producing a tubular web afterwards cut into suitable lengths for all varieties of hose; circular sleeve machines, circular body machines, as well as circular web machines for making both body and sleeves of undershirts, jerseys, sweaters, etc. Special machines are also made for knitting both plain and ribbed plaited goods, that is, with both sides wool while the center is of cotton, or with a silk or worsted face on one side and the back of an inferior yarn. In the form of auxiliary appliances are produced many kinds of st.i.tching machines; circular latch-needle machines for plain ribbed, mock seam, and striped goods; steam presses; hose rolling machines; hose cutting and welting machines, and many other accessories to hosiery manufacture.

[Ill.u.s.tration: KNITTING MACHINE FOR UNDERWEAR]

At present fully one-third of the knit underwear used in this country is of the ribbed description. It is made in all the materials that the older flat goods are composed of, including silk, silk mixtures, linen, wool, lisle, and cotton. Rib work is ordinarily stronger and more lasting than plain. It is also invaluable for many purposes on account of its tendency to contract and expand in the direction of the circ.u.mference without altering its length. This feature makes it indispensable for tops to socks and wrist work for shirts, mittens, gloves, etc., and for the production of heavy garments such as cardigans and sweaters. The expense of knitting rib work is higher than plain knitting, owing to the fact that the machines cannot turn out so great a quant.i.ty within a given time.

The formation of the rib in knitted goods is unique in its principle.

The effect is produced by reversing the st.i.tch. In place of making the st.i.tch work appear entirely upon one side of the fabric, as in plain work, the needles are so arranged that every alternate row, or two rows alternately, are reversed, thus making both sides alike. Plain work is done with a single bank of needles, while rib work requires two banks, the function of the second one being to pull and loop the yarn in an opposite direction, thus producing a thicker and more elastic web.

Double work in knitting consists merely in running two threads where one is commonly used. The work is done readily and with but little extra cost for labor. Coa.r.s.er and heavier needles are required, also a wider gauge for the needle cylinder. Fancy effects in double work are produced by running two colors instead of one. The tendency is for one thread to twine about the other, thus making attractive double-and-twist work. Lumbermen's socks and like goods are often knitted on this plan, though for the most part double work is for the heels, toes, and soles of ordinary hose.

=Stripe Knitting.= The process of striping knitted fabrics is accomplished automatically by a system of changing the yarns when delivered by the feeds. Circular machines knitting a tubular web cannot be utilized for this purpose, hence the work is done on fashioning or stocking frames. It has only been within recent years that makers of knitting machinery have been able to offer machines on which more than one kind of yarn could be knit at one time. There are now in use, however, machines that will readily knit several colors of yarn at the same time.

=Knitting Cotton.= A variety of loosely twisted, four-ply cotton yarn, dyed in various plain and mixed colors, employed for knitting hosiery, tidies, mats, etc., by hand. It is numbered from 8, coa.r.s.e, to 20, fine, and commonly put up sixteen b.a.l.l.s in a box, each box containing two pounds, manufacturer's weight.

=Knitting Silk.= A loosely twisted silk thread of domestic manufacture employed for knitting mittens, stockings, and other articles by hand.

It is also much used for crochet work. Knitting silk is put up in the form of b.a.l.l.s, each containing one-half ounce of thread. It is made in but two sizes, No. 300, coa.r.s.e, and No. 500, fine; each ball of the former number contains 150 yards of silk; of the latter 250 yards. No.

500 is manufactured only in white, cream, and black; the No. 300 is fast dyed in a great variety of colors.

=Hosiery Manufacture.= According to the particular method by which socks and stockings are made, of whatever kind, quality, or material, they are cla.s.sed as cut goods, seamless, or full fashioned. Of the three methods of manufacturing the first named is the least expensive.

Cut goods are made of round webbing knitted on what is called a circular knitting machine. The web has the appearance of a long roll of cloth about the width of a sock or stocking when pressed flat. The first operation consists in cutting off pieces the length of the stocking desired, these lengths, of course, being the same (unshaped) from end to end. The shaping of the leg is effected either by cutting out enough of the stocking from the calf to the heel to allow part to be sewn up and shaped to fit the ankle, or by shrinking. In the heeling room where the pieces next go, the cutters are furnished with gauges or patterns that indicate just where to make a slit for the insertion of the heel, generally of a different color. When the heel is sewn in, the stocking begins to a.s.sume its rightful shape. The toe is now put on and the stocking is practically finished. In the case of socks the final operation consists in attaching the ribbed top, which tends to draw the upper part of the leg together, thus causing it to a.s.sume a better shape. The final work includes scouring, dyeing, and shaping. The cost of making cut goods is less by a few cents per dozen than when knit seamless. While some very creditable hose are produced in this way, yet the existence of the heavy seam is an objection which confines them to the poorest cla.s.s of trade. Cut goods are made in all sizes and kinds for men, women, and children.

Seamless hose are made on a specially constructed machine which produces the entire stocking, but leaves the toe piece to be joined together by a looping attachment. On half-hose the leg is made the same size down to the ankle, but on ladies' hose the stocking is shaped somewhat in the machine. Seamless hose are not, strictly speaking, entirely seamless, inasmuch as all stockings made on a circular knitting machine must have a seam somewhere. There must be a beginning and an ending. In the case of the stocking the ending is at the toe, and the opening left can only be closed with a seam. In some mills this opening is automatically st.i.tched together on special machines; in others, girls do it by hand with needle and thread.

Neither by machine nor handwork can the opening be closed with exactly the same st.i.tch as that made by the needles of the power knitter.

However, the seam is of small proportions, and when the goods are scoured, pressed, and finished the presence of the seam is a minor item, as it neither incommodes the wearer nor mars the appearance of the stocking. Seamless goods are made in a great variety of qualities, ranging from cotton half-hose at fifty cents per dozen to the fine worsted stockings at $6.00 per dozen. A notable and very commendable feature of seamless hose is the socket-like shape of the heel, which fits that portion of the foot as though really fitted to it. As far as comfort and fit are concerned, the manufacture of seamless hosiery has now reached such a degree of perfection as to bring it second only to the full-fashioned variety.

Full-fashioned hose are produced by means of complicated and expensive knitting frames, which automatically drop the requisite number of st.i.tches at the ankle so as gradually to narrow the web down and give the stocking the natural shape of the leg. The toe is produced in the same way, and the shaping of heel and gusset is brought about in like manner. Hence, the goods are called full-fashioned, because so fashioned as to conform to the proportions of the leg and foot. Hose and underwear made by this method are knit in flat strips and then seamed either by hand or machine. Generally special machines are used, which take up and complete the selvedges, thus avoiding objectionable seams with raw edges.

The knitting frames used for making full-fashioned goods are large, intricate, expensive, and slow in operation; they are difficult to keep in order and require skilful operators. The largest ones knit from fourteen to eighteen stockings at once, using as many as four threads of different colors in the production of patterns. The first operation consists in knitting the leg down to the foot; then the legs are transferred by expert workmen to another frame which knits the foot. Next they go to another department where, with the aid of a special looping machine, the heels and toes are st.i.tched together.